Cart
← Back to Product Catalog

S-Track – Ostrich D1616

I/O Interfaces

More details

Similar Products

ssl-x-light-bridge
  • Solid State Logic

SSL – X-Light Bridge

For the touring market, a new 1U X-Light Bridge interface designed to be deployed within stage I/O racks, features a fully redundant pair of X-Light connections using Neutrik opticalCON Quad format connectors on the front panel.  For the touring market, a new 1U X-Light Bridge interface designed to be deployed within stage I/O racks, features a fully redundant pair of X-Light connections using Neutrik opticalCON Quad format connectors on the front panel. On the rear panel there are two redundant pairs of Neutrik etherCON format Dante connections for audio and control distribution. Up to eight SB 32.24 stageboxes can now be connected via a pair of network switches to a single X-Light Bridge redundantly at 96 kHz with gain control of each input. There are no big workflow changes either! X-Light Bridge provides a seamless I/O boost for the user, as the routing process in the console interface is exactly the same via the X-Light Bridge as it is via the existing local Dante Expander Module. This includes the ability to configure the X-Light channel capacity as Virtual Tie Lines, for routing in Dante Controller, or as Dual Domain Routes for seamless routing and control from console channels.
    I/O Interfaces
  • Dante Ch: 256x256
  • 24-bit
See the product
monacor-international-dtta-2|monacor-international-dtta-2
  • Monacor

Monacor – DTTA-2

The DTTA-2 is a Dante I/O box, for converting analogue audio signals into Dante streams.  The DTTA-2 is a Dante I/O box, for converting analogue audio signals into Dante streams. 
  • 2 x microphone/line input (XLR, bal.)
  • 1 x aux input (3.5 mm stereo jack)
  • 1 x Dante™ output (EtherCon/RJ45)
  • 1 x monitor output (3.5 mm stereo jack)
  • Gain adjustable via recessed potentiometer (0-60 dB)
  • Individually switchable 12 V phantom power for the inputs
  • Encoding/decoding: 16/24/32 bits
  • Sample rates: 48/88.2/96
    I/O Interfaces
See the product
redx-poe60dd
  • Redx

Redx – PoE25DD

The PoE25DD is a 20w/8 ohm output audio power module. It adopts the latest PoE technology standard and can solve power supply and Dante digital audio signal transmission and control with only one network cable. The PoE25DD is a 20w/8 ohm output audio power module. It adopts the latest PoE technology standard and can solve power supply and Dante digital audio signal transmission and control with only one network cable.
  • Integration of network PoE power supply and Dante audio data transmission, simplifying cable layout and compliance with Ethernet engineering specifications;
  • Audio transmission realizes digitization, networking, and system expansion;
  • distributed digital audio systems: In large audio systems with multiple input and output devices, the audio devices are connected decentralized, routing and signal distribution through software;
  • Through the Dante interface, it is ensured that the network audio data has excellent delay indicators, and the number of audio channels carried by a single network cable terminal reaches 64 channels of input and 64 channels of output;
  • Dante Controller software allows easy network-wide Dante device discovery and full network audio routing configuration.
  • The PoE network cabling uses an Ethernet cable to carry 48V DC power. It has no restrictions on high-voltage AC wiring and better meets site safety and fire protection specifications. It can be widely used in ballrooms/function rooms, bars/restaurants, classrooms, conference rooms, chapels, theme parks, and shopping malls.
    I/O Interfaces
See the product