S-Track – Eagle XDP6

The PMX 15 D system hosts a coaxial driver with a 15-inch (38 cm) neodymium woofer (LF) and a 2-inch diaphragm compression driver (HF). The PMX 15 D is bi-amplified using two dedicated high resonance digital amplifiers, featuring outstanding efficiency, with each amp delivering 1500 Watts (LF) and 400 Watts (HF) under 8 ohms. The PMX 15 D system hosts a coaxial driver with a 15-inch (38 cm) neodymium woofer (LF) and a 2-inch diaphragm compression driver (HF). The PMX 15 D is bi-amplified using two dedicated high resonance digital amplifiers, featuring outstanding efficiency, with each amp delivering 1500 Watts (LF) and 400 Watts (HF) under 8 ohms.  Each speaker channel is under control by a powerful, 64-bit digital processing unit capable of a 118 dB dynamic range. Each of these on-board DSP units include a module dedicated to managing core system parameters including system EQ, time alignment between sections, limiting, and transducer thermal protection. This level of control makes the PMX D Series fully protected and able to operate at the full extent of its abilities.

Speaker model: CX112P

Speaker type: 12”Active coaxial loudspeaker

Unit configuration: LF：12" unit 2.5"(65mm）Voice coil

HF：1.7"（44mm）Voice coil driver

Frequency response: 70Hz-17kHz(-10dB)

Rated power: LF：250W， HF：50W

Sensitivity: LF：101dB， HF：109dB

Sound pressure level： 131dB (peak)

Radiation Angle: 60°×60°

Crossover point: DSP control

Size (mm) : 583×376×377 (W×H×D)

Module amplifier power: HF：150W，LF：500W (Class D)

Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output

Module DSP control: RS485、USB or Dante

The speaker is Power supply via POE+ (Power over Ethernet) or DC19V power supply, available at option. The speaker includes a Class-D Audio Power amplifier which provides effective use of power.
The audio network system is also compatible with AES67 which makes this speaker system to be flexible with other audio network systems.
The system comes with 3” 30W loudspeaker driver, MNS-3AXXRWFS-1P that has excellent dispersion, wide bandwidth and smooth frequency response which makes this the top choice for today’s overhead commercial applications.
This assembly can be used in wide range of projects for paging and background music applications.

[Model:MNS-3A11RWFS-1P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-3A12RWFS-1P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-3A22RWFS-1P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.