RTS – ROAMEO


More details

Similar Products

npx_h1100_front
  • Biamp

Biamp – NPX H1100

The NPX H1100 is a 10-button convenience paging station with handheld microphone for use in Qt X and Tesira systems. The H1100 features embedded DSP and on-board memory to support standard and advanced public address functionalities. Digital audio and control data can be transmitted by either AVB or Dante®. The NPX H1100 can store 999 user-configurable page codes and up to 10 prerecorded messages. Additionally, the H1100 supports both tabletop and wall mounting with a removable “foot” that allows the paging station to be mounted flat against any surface, and a K-slot is included for enhanced physical security via an optional Kensington® lock. The NPX H1100 meets convenience paging requirements for facilities of all sizes.

    Intercoms
glensound-gs-fw012-ip_600px|glensound-gs-fw012-ip_600px
  • Glensound

Glensound – GS-FW012 ip

The GS-FW012 ip is the Dante network audio version of the GS-FW012 4W unit. The GS-FW012 ip is the Dante network audio version of the GS-FW012 4W unit.   There are still four inputs for the top panel loudspeaker or headphone monitoring, each with their own level controls and each being derived from the Dante network.  There are still four talkback outputs each being routed to the Dante network. Both the inputs and outputs are presented via a single rear panel Neutricon RJ45/CAT5 connection that is Dante/AES67 compliant. The four talkback outputs are identical.  Each has a 3 position lever key talk switch that is either off, locked on, or in a sprung push to talk mode.  The output of each circuit can be off unless the talkback button is pressed, looping the the associated Dante input input, or outputting the local cue input. The local cue input is presented on XLR and has it's own level pot for the speaker or headphone monitoring. A good quality microphone amplifier with adjustable gain followed by a compressor limiter is built into the unit making its talkback outputs to the Dante network crystal clear. Conversion of the audio signals to/ from the Dante network are by low noise, high bandwidth 48K 24bit converters providing superb performance.  
    Intercoms
m545dc_f_1000
  • Studio Technologies

Studio Technologies – Model 545DC Intercom Interface

The Model 545DC Intercom Interface allows two single-channel analog party-line (PL) intercom circuits and associated user devices to be incorporated into Dante® audio-over-Ethernet applications. The Model 545DC directly supports both analog party-line (PL) and Dante, providing excellent performance in both domains. An Ethernet connection is all that's required to make the Model 545DC part of a sophisticated, networked audio system.
    Intercoms