Cart
← Back to Product Catalog

RTS – OMS

Intercoms

More details

Similar Products

ctp-systems-FWD6006s|ctp-systems-FWD6006s
  • CTP Systems

CTP Systems – FWD6006

The FWD6006 is a six channel desktop version of our FWD8000. It is a Dante enabled four wire box with six four wire inputs, six four wire outputs plus six IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections three of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet. The FWD6006 is a six channel desktop version of our FWD8000. It is a Dante enabled four wire box with six four wire inputs, six four wire outputs plus six IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections three of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet. Each channel has a cut switch, a ifb monitor button plus a vox incoming audio present indicator. Press the talk keys down for momentary operation and up to latch. The latch operation can be defeated if required. Units can be supplied with a headphone jack or a 5 pin XLR headset connector. There is also a microphone cut button. When a talk key is pressed incoming audio to the loudspeaker is normally dimmed to prevent feedback, the level may be adjusted or defeated as required. The FWD6006 has a secondary ethernet interface which may be used a switch output or for network redundancy. Mains requirement is 110-240VAC 50/60Hz. Dimensions: 100mm high, 180mm deep, 200mm wide.
    Intercoms
  • Dante Ch: 16x16
  • 48kHz-96kHz
See the product
545DR_For_Dante_Website
  • Studio Technologies

Studio Technologies – Model 545DR Intercom Interface

The Model 545DR is designed for applications that utilize 2-channel party-line (PL) intercom circuits. Dante audio-over-Ethernet media networking technology is used to transport the two send and two receive audio channels. Two Model 545DR units can interconnect by way of an Ethernet network. Alternately, a Model 545DR can interconnect with other devices such as matrix intercom systems, DSP processors, and audio consoles. Party-line power and termination can be supplied by the Model 545DR, allowing direct connection of user beltpacks such as the RTS® BP325. Housed in a lightweight tabletop enclosure with optional mounting kits. Power-over-Ethernet (PoE) powered.

Key Features

Dante audio-over-Ethernet technology

Integrated party-line intercom power source

Analog hybrids with auto null capability

Input and output level metering

Excellent audio quality

PoE and 12 Vdc powering

Standard connectors

Table-top, portable, or optional rack-mount use

    Intercoms
  • Dante Ch: 2x2
  • 24-bit
See the product
aeq-crossNET_1200px
  • AEQ

AEQ – KROMA CrossNET 72

CrossNet 72 has 32-ports Dante IP interface, 8 Kroma digital intercom ports, 12 balanced, broadcase quality analogue ports, and 20 compressed audio IP ports. CrossNet 72 has 32-ports Dante IP interface, 8 Kroma digital intercom ports, 12 balanced, broadcase quality analogue ports, and 20 compressed audio IP ports. CrossNET is a compact intercom matrix, built into a 1U-height 19” enclosure, featuring basic IP connectivity based on Dante™ technology, that is compatible with the recent AES-67 standard, allowing for the transportation of broadcast quality audio. It incorporates high-quality analog balanced inputs and outputs and supports former Kroma IP panels and interfaces with reduced bandwidth compressed audio. It also supports Kroma panels with digital audio link. The proper matrix features a 4-key intercom user interface on its front panel. 
    Intercoms
See the product