RTS - OEI-2 | Dante

RTS – OEI-2

Product Information

The OEI-2 enables connectivity between analogue audio sources and legacy RTS key panels and an OMNEO network. This allows users to maintain existing infrastructure and the equity of their original equipment investment while updating to high-performance OMNEO media networking architecture.

Provides an interface between legacy RTS key panels and RTS OMI OMNEO interface cards for ADAM and ADAM-M units.
Support for both USOC or 586B wiring.
Provides less than 20 ms of audio latency in typical network installations.
Provides a frequency response of 20 Hz to 20 KHz to the keypanel.
Supports DHCP and device discovery for easy set up and network management.
Optional fibre connection – multi-mode or single-mode available.
Supports CAT-5/5e and CAT-6 with dual Ethernet connectors for device looping.
Supports compatibility with third-party Dante™

Burl – B2 Bomber ADC

The B2 Bomber analog to digital converter is designed to give you the ultimate in recording tone. BURL Audio designed an analog audio path that is complimentary to your mic pre and to the analog to digital process. By using a revolutionary hybrid circuit with a proprietary transformer, the BURL AUDIO BX1, and a discrete class-A, zero feedback, zero capacitor signal path, we have achieved dynamic and tonal balance. Features:

44.1k Hz to 192k Hz, 24 bit, 2 channel ADC
Proprietary, high definition, BURL Audio BX1 transformer input
All class A, discrete transistors signal path with zero feedback, zero caps
Audiophile quality 6 position attenuator with standard headroom settings
High definition metering with simultaneous RMS and peak indication
Dante, 2 AES, SPDIF and Toslink output
BNC word clock input with two outputs of extremely low jitter clock
Frequency response at 48kHz sample rate is 12Hz to 22kHz, +/- 0.1dB
Frequency response at 96kHz sample rate is 15Hz to 46kHz, +/- 0.1dB
Frequency response at 192kHz sample rate is 18Hz to 94kHz, +/- 0.1dB
120dB Dynamic Range (A- weighted), 117dB (no weighting)
-100dB THD+N (+4dBU = -15dBFs)
-94 dB THD+N (+18dBU = -1dBFs)
Rugged, Made in USA design

I/O Interfaces

See the product

RP1-Virtual-product-page-product-page-e1557908395292

Calrec

Calrec – RP1

Calrec's RP1 is a remote production console that gives broadcasters the ability to capture a wide range of live events, such as regional sports, news or music festivals, and mix them in a remote facility hundreds or thousands of miles away.

I/O Interfaces

See the product

Ferrofish

Ferrofish – A32 DANTE

The A32 Dante Version has an additional interface with 64 digital inputs and 64 digital outputs, which can be easily integrated into existing DANTE networks. The A32 Dante Version has an additional interface with 64 digital inputs and 64 digital outputs, which can be easily integrated into existing DANTE networks. Alternatively, with an interconnection of two A32 DANTEs, a live recording on the computer of up to 64 channels is possible at any time. In this case, a separate sound card (such as, for example, when using the ADAT or MADI ports) is not necessary. The intuitive operating concept and the redundancy options, as well as the multiple submix and routing possibilities, make the A32 DANTE an ideal component of every DANTE interconnected system.

I/O Interfaces

See the product

RTS – OEI-2

Product Information

Similar Products

Burl – B2 Bomber ADC

Calrec – RP1

Ferrofish – A32 DANTE

Support

Company

Dante Networking Alliance

RTS – OEI-2

Product Information

Similar Products

Burl – B2 Bomber ADC

Calrec – RP1

Ferrofish – A32 DANTE

I would like to receive product notices, training and event information and Dante product marketing updates via email. Opt-out at any time. For further details, including about your rights, see our Privacy Policy.