Cart
← Back to Product Catalog

RTS – KP-3016 Keypanel

Intercoms

More details

Similar Products

Beatrice_MOTO_Angle_BAN
  • Glensound

Glensound – Beatrice M1

The Glensound BEATRICE M1 is a robust interface for connecting wireless radios and walkie talkies to a Beatrice intercom. It has 4* audio inputs from the network and features crystal clear audio. It is designed for broadcast, theatre and professional audio pplications.

The M1 is part of the Beatrice intercom system that utilises the reliable and proven Dante® network audio transmission protocol to allow real time distribution of uncompressed audio across standard networks. As such the BEATRICE M1 is also fully compatible with other manufacturers’ equipment using the Dante® protocol.

Being able to interface a network audio intercom to low cost wireless radios and walkie talkies provides a real benefit to small theatres and studios. The low price point of walkie talkies combined with the features of Beatrice makes this a great solution for the technician and accountant alike.

    Intercoms
See the product
glensound-gs-fw012-ip_600px|glensound-gs-fw012-ip_600px
  • Glensound

Glensound – GS-FW012 ip

The GS-FW012 ip is the Dante network audio version of the GS-FW012 4W unit. The GS-FW012 ip is the Dante network audio version of the GS-FW012 4W unit.   There are still four inputs for the top panel loudspeaker or headphone monitoring, each with their own level controls and each being derived from the Dante network.  There are still four talkback outputs each being routed to the Dante network. Both the inputs and outputs are presented via a single rear panel Neutricon RJ45/CAT5 connection that is Dante/AES67 compliant. The four talkback outputs are identical.  Each has a 3 position lever key talk switch that is either off, locked on, or in a sprung push to talk mode.  The output of each circuit can be off unless the talkback button is pressed, looping the the associated Dante input input, or outputting the local cue input. The local cue input is presented on XLR and has it's own level pot for the speaker or headphone monitoring. A good quality microphone amplifier with adjustable gain followed by a compressor limiter is built into the unit making its talkback outputs to the Dante network crystal clear. Conversion of the audio signals to/ from the Dante network are by low noise, high bandwidth 48K 24bit converters providing superb performance.  
    Intercoms
See the product
rts-arni-g2
  • RTS

RTS – ARNI G2

The ARNI (Audio Routed Network Interface) G2 component of an OMNEO system enhances the scalability of the system by its ability to act as a DHCP (Dynamic Host Configuration Protocol) server which eliminates the need to use the IPv4LL protocol. As a DHCP server, ARNI G2 supports one (1) subnet when there is no DHCP server available. It can act as a DNS (Domain Name System) server, storing the DNS-SD (Domain Name System-Service Directory) records of nodes and responding to controller queries, meaning standard DNS can be used for DNS-SD and name resolving. ARNI G2 also extends the use of PTP (Precision Time Protocol) over multiple IP (Internet Protocol) subnets by acting as a boundary clock, synchronized to a master clock using unicast PTP and acts as the clock master in its own subnet using multicast PTP to synchronize the OMNEO nodes.

    Intercoms
See the product