Glensound – Beatrice D16


More details

Similar Products

alcorn-mcbride-VC12X
  • Alcorn McBride

Alcorn McBride – V-Com VC12X

The V-Com VC12X station includes 12  illuminated buttons that are user-configurable for ring zone or breakaway functions. It includes a handset, a ringer, and level control.  This is an off-the-shelf solution that is designed to mount in a standard 8″ x 10″ intercom box like the Hoffman C-P1612. Alcorn McBride believe that intercom solutions should be a breeze to install and intuitive to operate.  Just like their popular V-Page product line, they have designed their V-Com solutions to leverage industry-standard DSP platforms like Q-SYS while providing a simple button-based UI that just makes sense. The V-Com VC12X station includes 12  illuminated buttons that are user-configurable for ring zone or breakaway functions. It includes a handset, a ringer, and level control.  This is an off-the-shelf solution that is designed to mount in a standard 8″ x 10″ intercom box like the Hoffman C-P1612. A single Ethernet cable provides network audio (Dante or AES67), power (PoE), and control between each V-Com station and the DSP device.  It even supports SFP network modules for applications that require the station to be far away from the equipment room.
    Intercoms
studio-technologies-model-371a
  • Studio Technologies

Studio Technologies – Model 371A Intercom Beltpack

The Model 371A Intercom Beltpack begins with the features offered by 2-channel broadcast-style party-line intercom user devices then adds support for traditional single-channel headsets. Applications that have traditionally deployed single-channel analog party-line intercom systems from firms such as Clear-Com® can now easily upgrade to a high-performance dual-channel system. To maintain compatibility and user familiarity, legacy headsets that use a 4-pin female XLR connector are directly compatible. Key Features Dante audio-over-Ethernet technology Two independent talk and listen channels Integrated call function Supports dynamic and electret microphones 4-pin male XLR headset connector Excellent audio quality Uses STcontroller for configuration AES67 and Dante Domain Manager™ support Power-over-Ethernet (PoE) powered
    Intercoms
  • Dante Ch: 2x2
  • 24-bit
ctp-systems-FWD8000f
  • CTP Systems

CTP Systems – FWD8000

The FWD8000 is a Dante enabled four wire box with eight four wire inputs, eight four wire outputs plus eight IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections four of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet. The FWD8000 is a Dante enabled four wire box with eight four wire inputs, eight four wire outputs plus eight IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections four of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet. Each channel has a cut switch, a ifb monitor button plus a vox incoming audio present indicator. Press the talk keys down for momentary operation and up to latch. The latch operation can be defeated if required. Units can be supplied with a headphone jack or a 5 pin XLR headset connector.  There is an 'all talk' key which can be set to talk to any or all of the four wire outputs. There is also a microphone cut button. When a talk key is pressed incoming audio to the loudspeaker is normally dimmed to prevent feedback, the level may be adjusted or defeated as required.  The FWD8000 has a secondary ethernet interface which may be used a switch output or for network redundancy. Mains requirement is 110-240VAC 50/60Hz. Dimensions: 1RU 200mm deep.
    Intercoms
  • Dante Ch: 16x18