RedNet TNX

Product Information

Designed for use in immersive audio, broadcast, post-production, or live sound, RedNet TNX brings the performance of RedNet to a more compact and portable format.

With direct Thunderbolt connectivity for macOS and Windows systems, RedNet TNX makes it easier than ever to access low-latency, high-resolution Dante audio in studios, mobile rigs, or shared workspace environments.

Out of the box, RedNet TNX delivers 128×128 channels of 24-bit/192kHz audio with ultra-low round-trip latency. For larger systems, a paid Dante Ready™ upgrade unlocks 256×256 channels at 24-bit/96kHz.

This flexibility makes it a powerful choice for facilities looking to scale or transition to AoIP workflows without overhauling the infrastructure of your studio.

Specifications

Dante Ch: 128x128
Bit Depth: 24-bit
Sample Rate: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz

Wohler – OPT-DANTE (iAM)

Enable monitoring from up to a 64ch Dante™ Input in iAM Series products.

Installing a Wohler unit with the Dante hardware option into an existing and functioning Dante network is virtually plug and play. The iAM Series rear panel AoIP jack supports 1Gb/s and 100Mb/s Ethernet devices in Dante Audio over IP network configurations. Channel source selections are made by choosing Input Type ‘AoIP’ in the Configuration-Configure Presets page regardless of which AoIP option is installed. The iAM-series unit is set up at the Wohler factory to be used as a slave rather than a master within the Dante network. Other devices or software, such as a Dante Controller, are expected to be responsible for most device configurations and all audio routing.

Dante Interface Cards

Dante Ch: 64x0
AES67 Enabled

See the product

Bosch

Bosch – OM-1

The OM‑1 is a compact interface module which is prepared for a connection to an OMNEO network. The OM‑1 is able to send and receive Dante audio to and from other PAVIRO Controllers with an OM‑1 Interface Module. The OM‑1 is a compact interface module which is prepared for a connection to an OMNEO network. The OM‑1 is able to send and receive Dante audio to and from other PAVIRO Controllers with an OM‑1 Interface Module. The transmission of up to 16 digital audio input signals and 16 digital audio output channels with low latency is possible with the OM‑1.

Gigabit Ethernet Interface - 1000 Mbit/s full-duplex Ethernet Interface, IEEE 802.3u compatible
Secondary Gigabit Ethernet Interface - Second Ethernet Interface for the connection of a redundant network to establish fault-tolerant systems
Status LEDs - Link, Activity and Gigabit active status indication for each Ethernet interface

Dante Interface Cards

See the product

NEXUS_02-12_21-dante-audinate_1|NEXUS_02-12_21-dante-audinate_1

Stage Tec

Stage Tec – XDIP

The audio routing system Nexus can be equipped with a new Dante™ interface module board named XDIP which connects Nexus to IP networks running Audinate’s Dante™. The card is equipped with sampling rate converters on all 64 inputs and outputs. The integrated Ethernet switch offers 4 ports and is AVB-ready. The fully digital Nexus is one of most versatile audio network and routing systems on the market today and is a core product of Stage Tec, the Berlin manufacturer of professional audio mixing consoles and routers. Nexus and the router node Nexus Star are also hosts to the audio processing of Stage Tec mixing consoles such as Aurus and Crescendo.

Dante Interface Cards

See the product

RedNet TNX

Product Information

Specifications

Similar Products

Wohler – OPT-DANTE (iAM)

Bosch – OM-1

Stage Tec – XDIP

Stay connected to Dante

Support

Company

Dante Networking Alliance