Cart
← Back to Product Catalog

promedias – proDT 2XI UP

I/O Interfaces

More details

Similar Products

Dante官网logo
  • BARE

BARE – DE-6

Features： 1. The audio signal and power transmission of the speaker are realized through the same network cable. 2. The RJ45 interface on the back panel of the box is equipped with XLR firmware, which can be used for waterproofing and strengthen the connection between the box and the wire. 3. The network cable realizes signal transmission and power supply; 4. The IP address is automatically assigned through the router DHCP; 5. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network 6. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 7. The built-in DSP network active speaker can remotely control the EQ and pressure limit of the active speaker on the PC side. 8. It has complete protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 9. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.
    I/O Interfaces
See the product
AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo Dante 16.0M

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 16.0M provides 16 balanced analog audio inputs with terminal block connectors

. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. With Terminal block termination.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

    I/O Interfaces
  • Dante Ch: 16x16
  • 16-bit, 24-bit, 32-bit
See the product
Burl_B2_DAC_Dante_Front
  • Burl Audio

Burl – B2 Bomber DAC

THE B2 BOMBER DIGITAL / ANALOG CONVERTER The B2 Bomber DAC is the result of tireless digital to analog research and development. As a result the B2 DAC features unique class-A, discrete op-amps with passive filtering. This makes the B2 DAC ideal for monitoring. Couple this with state of the art conversion technology and the B2 Bomber DAC delivers sonic purity and dynamics thus far unheard of. Features: • 44.1k Hz to 192k Hz, 24 bit, 2 channel DAC • Proprietary custom design BOPA1, all discrete op-amps • Passive filters • All class-A • Zero capacitor signal path • Audiophile quality 6 position attenuator with standard headroom settings • High definition metering with simultaneous RMS and peak indication • Dante, 2 AES, SPDIF and Toslink input • BNC word clock input with two outputs of extremely low jitter clock • Frequency response at 48kHz sample rate is 10Hz to 22kHz, +/- 0.1dB • Frequency response at 96kHz sample rate is 10Hz to 30kHz, +/- 0.1dB, -0.3 dB @ 40kHz • Frequency response at 192kHz sample rate is 10Hz to 30kHz, +/- 0.1dB, -1.5 dB @ 90kHz • 115dB Dynamic Range • -96 dB THD+N, full scale output = +18dBu • Rugged, Made in USA design • Check with dealers for pricing
    I/O Interfaces
See the product