Cart
← Back to Product Catalog

Burl – B2 Bomber DAC

I/O Interfaces

More details

Similar Products

Alfatron-ALF-DAO-2XLR800x371-1
  • Alfatron Electronics

ALF-DAO-2XLR

he ALF-DAO-2XLR Dante to 2channel analog output adapter is a complete high-performance Dante device with the automation and ease-of-use features that make Dante the world’s most popular audio networking solution. The ALF-DAO-2XLR Adapter is compatible with all Dante interfaces and provides all the features you would expect from a Dante audio network. It is capable of providing high-fidelity audio reproduction, ultra-low latency, and sample-accurate synchronization across the entire network. Features:
  • Seamlessly integrate Dante systems into traditional analog systems.
  • There is no need to discard familiar mixing consoles, wireless microphones, and other analog signal sources, or analog amplifiers. All you need is to incorporate them into your audio network via Dante I/O.
  • With 2 channels of analog output on XLR
  • POE(802.3af)
    I/O Interfaces
  • Dante Ch: 2x2
  • 24-bit
See the product
TASCAM_-_ML-4D-OUT-E
  • TASCAM

TASCAM – ML-4D/OUT-E

Built-in DSP 4 line outputs Dante converter to respond to various needs of contractor market and professional audio scene. Built-in DSP 4 line outputs Dante converter to respond to various needs of contractor market and professional audio scene. The ML-4D/OUT-E is a compact converter that converts Dante input signals into 4-channel line output signals. With half the size of a standard 1U rack, the ML-4D/OUT-E is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. ML-4D/OUT-E supports up to 96kHz/24bit and uses Euroblock connectors for analog line output.  
    I/O Interfaces
  • Dante Ch: 4x4
  • 16-bit, 24-bit
See the product
pbxxxd2
  • Profitt

Profitt – PBX-xxD-(12G)

A pair of PBX series devices allows you to implement transmission over a single fiber:

up to 4 x 12 G /3G/HD-SD SDI, ASI signals

AoIP (4 channels of audio, two inputs and two outputs on each side), Dante / AES 67 protocol , Primary / Secondary ports

The Audio to IP Converter ( AoIP ) is designed to connect microphone or line analog audio signals to local Ethernet transmission networks using the Dante protocol or the AES67 standard , for intercom over IP networks and / or for switching audio signals in a network.

An additional Ethernet port provides connection to a secondary ( Secondary ) audio transmission network, and can also be used for cascading devices (Switched).

There are two versions of the device:

models with transport up to 3 G SDI

models with transport up to 12 G SDI ( index -12 G in device code)

To transmit signals over a single fiber, the principle of CWDM (wavelength division) is used in the range of 1470 nm :1570 nm or 1270nm:1410 nm (index ' H ' in the block code). This allows you to organize both one-way and two-way video transmission.

The optical expansion port UPGRADE (1310 nm ) allows the transmission of additional signals transmitted at wavelengths of 1260nm: 1450 nm .

Thus, by connecting through the UPGRADE expansion port the second body ' P roBox ', operating at wavelengths of 1270nm:1410 nm (index ' L' in the block code), it is possible to transmit 8 3G / HD-SD SDI, ASI signals plus implement two independent AoIP lines through one fiber.

Power is supplied from an external adapter 12 V@1000 mA.

    I/O Interfaces
See the product