Prism Sound – Titan


More details

Similar Products

rdl-dds-bn22_1200px|rdl-dds-bn22_1200px
  • RDL

RDL – DDS-BN22

The DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. The DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DD-BN22. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides a switch to set the output to balanced professional line level or mic level. The DD-BN22 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN22 is PoE powered, and is available in multiple finishes with optional customized graphics. The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level on front-panel XLR jacks. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN22 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN22’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.
    I/O Interfaces
aurora-VLX-TCW2V-C
  • Aurora Multimedia

Aurora Multimedia – VLX-TCW2V-C

The VLX-TCW2V provides one of the most advanced IP Streaming solutions on the market utilizing Aurora’s IPBaseT® technology, which synergizes various IP/AV standards to work together as one.  The VLX-TCW2V provides one of the most advanced IP Streaming solutions on the market utilizing Aurora’s IPBaseT® technology, which synergizes various IP/AV standards to work together as one. It is the industry’s first 4K UHD transceiver with only 1.5 frame (25ms) latency and visually lossless compression. The VLX-TCW2V has 1 VGA and 1 HDMI port. Using a transmitter (encoder) and receiver (decoder), respectively, used to be the standard – until now. The VLX-TCW2 Series can be set up as either one to make installation, inventory, and troubleshooting easier.
    I/O Interfaces
  • Dante Ch: 2x2
  • 16-bit, 24-bit
xIOBluetooth_Group
  • Symetrix

Symetrix – xIO Bluetooth

Using a modern, full-featured Bluetooth 5.0 chipset allows the xIO Bluetooth to offer extended range, a stable connection, and world-class audio quality. Available in US/EU form factors, the xIO Bluetooth has a clean, sleek design compatible with standard single gang US wall boxes with Decora faceplates, as well as EU/UK standard wall boxes.

IP/PoE simplify installation by allowing a single cable from the xIO Bluetooth to a PoE enabled network switch. The xIO Bluetooth may be configured for media-only, phone bridge, or both, and can be controlled using Symetrix remotes, SymVue panels, or third-party control systems.

The xIO Bluetooth is a fully integrated member of the Symetrix xIO family of Dante endpoints allowing full control and configuration of the device, including Dante routing, from within Symetrix Composer™ software. The xIO Bluetooth is fully configurable including the Bluetooth friendly device name, Dante channel names, connect/reconnect functionality, and security.

    I/O Interfaces
  • Dante Ch: 4x4
  • 24-bit