Aurora Multimedia - VLX-TCW2V-C

Aurora Multimedia – VLX-TCW2V-C

Product Information

The VLX-TCW2V provides one of the most advanced IP Streaming solutions on the market utilizing Aurora’s IPBaseT® technology, which synergizes various IP/AV standards to work together as one.

The VLX-TCW2V provides one of the most advanced IP Streaming solutions on the market utilizing Aurora’s IPBaseT® technology, which synergizes various IP/AV standards to work together as one. It is the industry’s first 4K UHD transceiver with only 1.5 frame (25ms) latency and visually lossless compression. The VLX-TCW2V has 1 VGA and 1 HDMI port. Using a transmitter (encoder) and receiver (decoder), respectively, used to be the standard – until now. The VLX-TCW2 Series can be set up as either one to make installation, inventory, and troubleshooting easier.

Specifications

Dante Ch: 2x2
Bit Depth: 16-bit, 24-bit
Sample Rate: 44.1kHz, 48kHz, 88.2kHz, 96kHz
AES67 Enabled

IP-8i

The IP-8i is an AES67 audio interface allowing broadcasters to convert their audio in AES/EBU (8 stereo channels) or Analogue (4 stereo channels) format to AES67 (RAVENNA, Livewire, Dante). A total number of 8x RS232 inputs are available for transport of UECP/RDS/PAD data. The IP-8i offers you a straightforward audio to AES67 interface offering a variety of features and opportunities to ease your daily work. Flexible in application: The encoder is designed for easy converting audio to AES67. In case of audio silence, the IP-8i can automatically switch to an (optional) Icecast/shoutcast stream or play files from the internal memory.

I/O Interfaces

AES67 Enabled

See the product

Equipson

Equipson – DD4

DD4 devices are gateways used to convert DANTE (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.

DD4 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors.

It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.

I/O Interfaces

See the product

AudioScience

AudioScience – Iyo Dante 16.16LR

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 16.16MR provides 16x16 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

I/O Interfaces

Dante Ch: 16x16
16-bit, 24-bit, 32-bit

See the product

Aurora Multimedia – VLX-TCW2V-C

Product Information

Specifications

Similar Products

IP-8i

Equipson – DD4

AudioScience – Iyo Dante 16.16LR

Stay connected to Dante

Support

Company

Dante Networking Alliance