MT48


More Details

Similar Products

inter-m-DASR-288_600px|inter-m-DASR-288_600px
  • Inter-M

Inter-M – DASR-288

The DASR-288 is a digital audio transport system utilizing Audinate’s Dante™ network audio solution. The DASR-288 is a digital audio transport system utilizing Audinate’s Dante™ network audio solution. The DASR-288 connects to your network with a single Ethernet cable. It is a Dante Break Out / ecoder interface in a 2RU form factor designed for all types of commercial AV installations. It offers eight channels of line-level analogue in and 8 line-level analogue outputs. Precision 24-bit A-D and D-A converters are used for superb audio performance with a 119dB dynamic range at sample rates up to 192kHz. This product is used as the audio matrix, each having eight inputs, where you can send uncompressed audio with low latency using standard TCP/ IP Ethernet network. It’s remotely controlled via the network and can be placed anywhere in a facility. Unique to the DASR-288 is its Data tunneling. No other manufacturer offers this feature, which allows you to transport with the Digital audio, 8 contact closures in and 8 contact closures out together combined with either RS-232C serial data. Each of the 8 balanced analog inputs and 8 outputs may be assigned to any Dante flow in the system, either by means of the Audinate’s Dante Controller Windows or OSX application or Inter-M’s own S-Connect Windows Software. The S-Connect allows for system configuration as well as easy channel switching. The S-Connect Software is designed to operate by simple touch screen. Dual redundant Gigabit Dante Network connections are available. Both primary and secondary connections support full Gigabyte ports for full redundancy. Signal Monitoring is available for all 8 inputs and 8 outputs with a front panel mounded dual LEDs, indicating signal presence and clipping. Network status LEDs also monitor network connectivity and transition speed. Brand Interoperability Based on industry standards, Audinate’s Dante, is an uncompressed, multi-channel digital media networking technology, with near-zero latency and synchronization. Dante is the preferred audio networking solution that has been adopted by more pro-audio AV manufacturers than any other networking technology. Interoperability is a reality today. The Inter-M DASR-288 is compatible with hundreds of other Dante-enabled products available from the world’s leading manufacturers, enabling you to mix devices from multiple manufacturers.
    I/O Interfaces
Core256-Front_150dpi
  • DAD

DAD – Core 256

Core 256 is a digital router and monitoring interface with 256 ch. Thunderbolt 3 I/O, 256 ch. Dante AoIP I/O, MADI 64 ch. BNC I/O, 128 ch. 128 ch. MADI SFP I/O module option and 16 ch. ADAT dual TosLink I/O with 256x64 ch. Pro|Mon summing and speaker eq processing.

The Thunder|Core-driven Core 256 does not take up much space, but the power you can squeeze out of this little box is might make your jaw drop to the floor. With tons of channels, a wide palette of digital connectivity, built-in SPQ processing, Eucon control compatibility, internal summing engine and drivers for macOS and Windows 10, it is a pristine digital audio interface by any measure and for just about any application.

    I/O Interfaces
  • Dante Ch: 256x256
  • 24-bit
NxBoB16-400px
  • XTA

XTA – NxBoB16

The NXBoB8 and NXBoB16 can be inserted anywhere in a Dante digital audio stream, converting the signal to analogue for carrying to analogue amplifiers and PA systems. The units will also act as an amp manager for the MC2 Ti amplifier range, learning the network setup and then interrogating the amps to check that they are performing normally and report on the operational status.
    I/O Interfaces
  • Dante Ch: 16x0