Cart
← Back to Product Catalog

MT 48

Dante Interface Cards

More Details

Similar Products

sennheiser-dante-option-card|sennheiser-dante-option-card
  • Sennheiser

Sennheiser – EM 9046 DAN option card

The Sennheiser Dante™ card for the EM 9046 receiver enables its top-of-the-range Digital 9000 microphone system to be integrated into Dante audio-over-IP networks. The EM 9046 DAN extension card inserts into the EM 9046 eight-channel receiver expansion slot. Sixteen audio inputs can send both digital audio and command signals over the Dante network using the card. Two Gbit RJ45 sockets are provided that serve to establish two redundant network circuits or daisy-chain the signals. Sampling rates of 44.1/48/88.2 and 96 kHz at a resolution of 24 bits are possible with the card. Download firmware for Digital 9000 Microphone System to support Sennheiser EM 9046 DAN Dante option card
    Dante Interface Cards
  • Dante Ch: 16x0
  • 24-bit
See the product
pciecardflat|pciecardflat
  • Focusrite

Focusrite – RedNet PCIe Soundcard

[Discontinued] For situations in which low-latency performance is critical, such as tracking, the RedNet PCIe card provides the best possible performance for your system. This dedicated card fits into a Windows or Mac computer standard PCIe card slot or with a laptop using a Thunderbolt PCIe Chassis. It delivers up to 128 channels I/O with under 3ms latency dependending on ASIO/Core Audio buffer size. A standard RJ45 Gigabit Ethernet connector links your audio computer to the rest of the network via a GigE switch.
    Dante Interface Cards
See the product
isa-adn8-front
  • Focusrite

Focusrite – ISA ADN8

ISA ADN8 is an optional eight-channel A-D card that provides high-quality analogue-to-digital conversion for the Focusrite ISA 428 MkII and ISA 828 MkII microphone preamps. Featuring Dante, AES3 and ADAT connectivity, the card operates at sample rates up to 24-bit / 192kHz.

The card offers primary and secondary RJ45 Dante output ports, an AES59 DB25 connector for AES3 output, and a pair of TOSLINK connectors for ADAT output. Word Clock I/O on BNC connectors allows synchronisation to multiple digital sources. This also includes syncing the Dante network to house clock, or for syncing external equipment to the Dante network.

Dante outputs on the ISA ADN8 provide ISA 428 MkII and ISA 828 MkII with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller.

    Dante Interface Cards
  • Dante Ch: 0x8
  • 24-bit
See the product