Cart
← Back to Product Catalog

MONISMS – MNS-POE30W14820 DANTE POE POWERED MODULE

I/O Interfaces

More details

Similar Products

Neutrik-NA2-IO-DPRO
  • Neutrik

Neutrik – NA2-IO-DPRO

The NA2-IO-DPRO allows microphone-level signals and AES/EBU signals to be injected into or taken out of the Dante network. Besides acting as a Dante converter, NA2-IO-DPRO can also operate as an AES/EBU converter: microphone inputs can simultaneously be injected into the Dante network and sent to an OB van (for example) via an AES/EBU signal fed from the device’s XLR output. The NA2-IO-DPRO allows microphone-level signals and AES/EBU signals to be injected into or taken out of the Dante network. Besides acting as a Dante converter, NA2-IO-DPRO can also operate as an AES/EBU converter: microphone inputs can simultaneously be injected into the Dante network and sent to an OB van (for example) via an AES/EBU signal fed from the device’s XLR output. Digital audio networks simplify routing and distribution of audio signals for fixed installations, touring and event applications. Neutrik‘s Dante interface series and the numerous mounting options provide a complete solution for integrating legacy audio gear into the Dante network.
    I/O Interfaces
  • Dante Ch: 2x2
  • 16-bit, 24-bit, 32-bit
See the product
fp-nml2vp_400px
  • RDL

RDL – FP-NML2VP

The FP-NML2V is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output provides a mic/line switch and VCA for remote level control. The FP-NML2 is ideal for adapting standard audio amplifiers to a Dante network. Model FP-NML2VP operates from PoE. The FP-NML2V is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output provides a mic/line switch and VCA for remote level control. Separate remote controls may be used for each output, or a single remote control may be connected to adjust both outputs simultaneously. VCA control uses industry standard 0 to 10 Volts compatible with a range of RDL passive and multi-point rotary-encoder remote controls. The FP-NML2V is ideal for adapting standard audio amplifiers to a Dante network. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS with crosstalk below the noise floor. The FP-NML2V operates from 24 Vdc and is available in a PoE version: FP-NML2VP. If powered by 24 Vdc and PoE, the FP-NML2VP seamlessly switches over to PoE power upon loss of the external 24 V supply.
    I/O Interfaces
See the product
TASCAM_-_MM-4D-IN-E
  • TASCAM

TASCAM – MM-4D/IN-E

Built-in DSP 4 mic/line input Dante converter to respond to various needs of contractor market and professional audio scene. Built-in DSP 4 mic/line input Dante converter to respond to various needs of contractor market and professional audio scene. The MM-4D/IN-E is a compact converter that converts 4-channel mic/line input signals into Dante signals. With half the size of a standard 1U rack, the MM-4D/IN-E is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. MM-4D/IN-E supports up to 96kHz/24bit and uses Euroblock connectors for analog mic/line input.  
    I/O Interfaces
  • Dante Ch: 4x4
  • 16-bit, 24-bit
See the product