Cart
← Back to Product Catalog

Model 395 GPO Interface

I/O Interfaces

More Details

Similar Products

calrec-hydra2_800px|calrec-hydra2_800px
  • Calrec

Calrec – Hydra2

Hydra2 provides seamless, scalable audio networking of audio mixing consoles with routers and I/O interfaces, allowing for a large numbers of inputs and outputs to be shared and controlled irrespective of location.  Hydra2 provides seamless, scalable audio networking of audio mixing consoles with routers and I/O interfaces, allowing for a large numbers of inputs and outputs to be shared and controlled irrespective of location. Hydra2 does not compromise audio quality, performs with negligible latency and is founded on comprehensive, built-in fault detection and redundancy. Many of the world’s most successful broadcasters rely on Hydra2 infrastructure for live on-air application in both fixed and mobile installations every day. At the heart of Hydra2 is the 8192² Calrec router (4096² on Summa and Artemis Light). Networks become more advanced when multiple routers are connected together to add additional mixing consoles, or to increase the amount of I/O connections available. Routers, mixing consoles and I/O can all be easily connected to the network as and when needed. Hydra2 provides 1-to-n routing; input sources may be routed to any number of destinations in mixed formats, removing the need for external splits, distribution amplifiers and format convertors. Sources can be routed to multiple consoles, to multiple DSP inputs on each console and directly to output destinations all at the same time. I/O units connect to a Hydra2 router via a single Cat5e or fibre link and can carry 512 channels of 24 bit 48KHz audio in each direction simultaneously, along with control and error detection data. Bandwidth between routers can be increased in multiples of 512 channels by adding additional Hydra2 links between them. As with all Calrec products, audio quality and product reliability are our top concerns. All analogue pre-amps and line level paths are designed around our well proven and highly respected circuitry, providing very high headroom with a very low noise floor. Our lossless proprietary network transportation protocol does not compromise the high audio quality and maintains minimal latency.
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
See the product
AudioPressBox-D216-R-D_1200px|AudioPressBox-D216-R-D_1200px
  • AudioPressBox

AudioPressBox – APB-D216 R-D

The APB-D216 R-D is an active 19″ rack, AudioPressBox Drive Unit, 2 LINE Inputs, 2-channel Dante Interface, 16 Line/MIC Outputs, 2 buffered Outputs for up to 6 AudioPressBox expanders. The APB-D216 R-D is an active 19″ rack, AudioPressBox Drive Unit, 2 LINE Inputs, 2-channel Dante Interface, 16 Line/MIC Outputs, 2 buffered Outputs for up to 6 AudioPressBox expanders. 2-channel active drive unit features 2 Analogue DANTE inputs with high-quality digital-to-analogue converter. You can switch between Line or Dante input, depending on your needs. It offers 16 Line/MIC Level Outputs on the front and one output for expanders on the rear. Front outputs are balanced and individually transformer isolated with selectable output level for each output. You can expand the number of outputs with AudioPressBox expanders with up to 48 additional Line/MIC outputs per channel. As is AudioPressBox standard, you can use our signal processing like high-pass filter and compressor with limiter to achieve the perfect audio signal for all connected journalists. APB-Dante products uses Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector.
    I/O Interfaces
See the product
DA-296-Front-Lit_grande
  • Millennia

Millennia – DA-296 G­­ōzowta Dante

Millennia’s G­­ōzowta converts from Dante audio over Ethernet to high resolution analog at sample rates up to 96 kHz.

The DA-296 connects any two channels of Dante to your analog gear. Power amps, stage monitor systems, powered speakers and more.

The G­­ōzowta also has 1/4 and 1/8 inch headphone jacks with a level control so it can be used as part of a personal monitor system or for trouble shooting Dante audio streams.

Outputs include balanced XLR and Phoenix-style output connectors. Power is supplied by the Ethernet cable from PoE (power over Ethernet) enabled switches or in-line PoE injectors.

There is a -10dBV/+4dBu output reference level switch to accommodate most analog equipment

Housed in a rugged 1/3 rack width chassis, the G­­ōzowta is the same size as Millennia’s portable preamp series. It can also be bolted to a Mid Atlantic rack tray.

    I/O Interfaces
See the product