Martin Audio – SXH218


More details

Similar Products

6-Inch-POE-DANTE-Wall-Mounted-Wooden-Speakers-MNS-6AXXWS-2P-1280X720-001-768x432
  • MONISMS

MONISMS – MNS-6AXXWS-2P

The MONISMS MNS-6AXXWS-2P is a digital steerable active wall-mounted wooden speakers with DANTE®-Input.
Thanks to its very small and unobtrusive enclosure the MONISMS-Speaker is a fit for most architecturally sensitive environment including mu­seums, churches, conference-rooms and many more challenging spaces and environments.
With its two-channel DANTE®-input integration into existing IP-networks as well as a direct integration to other DANTE®-enabled products is simple.

[Model:MNS-6A11WS-2P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-6A12WS-2P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-6A22WS-2P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.

    Speakers
amadeus-ml12d_600px
  • Amadeus

Amadeus – ML 12 D

The ML 12 D is a self-Powered Subwoofer with built-in 24/96 DSP, Analog, AES3 and Dante I/O. The ML 12 D is a self-Powered Subwoofer with built-in 24/96 DSP, Analog, AES3 and Dante I/O.  In addition to legendary Amadeus reliability and sonic excellence, ML 12 D incorporates a newly refined Dante I/O section, offering options for full integration with leading third-party networking.
    Speakers
s218
  • Cadac

Cadac – S218

The S218 is a self-powered high-end subwoofer, which features 2 x 18" ported woofers. The power output of 4000 W (RMS) ensures for © very high SPL down to a frequency of 35 Hz. It can be combined with all products of the CADAC range and be used as subwoofer extension in ground stack configuration for point sources or line arrays and can be also used as ground stack horizontal subwoofer array. The DSP-electronic has 2 power amplifiers and 2 DSP channels. Internally, one S218 has 2 amplifier and 2 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the dispersion can be adjusted and optimized according to the listener area for the application of subwoofer arrays. CMAP enables to create arbitrary radiation patterns for the listener area with ground stack horizontal arrays.

    Speakers