Cart
← Back to Product Catalog

Marani – MDA4-1000M

Amplifiers

More details

Similar Products

LDIPA424T_1
  • Adam Hall Group

Adam Hall – LD Systems IPA424T

Good sound belongs everywhere - in the hotel lobby, in conference rooms, in schools and houses of worship. Demands are constantly increasing, not only in terms of quality, but also in terms of flexibility. Permanently installed and still flexible? This apparent contradiction can be resolved by the IPA Series DSP-based installation amplifiers.

The IPA 424 T is a professional, four-channel installation power amplifier with 4 x 240 watts. While the 70V/100V outputs are equipped with high quality toroidal core transformers, the low impedance 4-Ohm outputs are completely transformerless and guarantee the highest possible audio quality. The DSP functions include, amongst others, a parametric EQ with matching speaker library, dynamic tools, a matrix mixer, priority source selection and delay.

Despite this range of functions, the IPA Series power amps are easy to operate. Important functions such as signal, limit, protection and bridge mode are easily visible via the LEDs on the front panel.

HPF/LPF presets can be enabled directly on the device via DIP switches. The IPA 424 T is already prepared for remote control using future remote panels and paging microphones from LD Systems. The back-panel slot provides expansion card connectivity for additional future-proofing. The Ethernet card offers comprehensive configurability and management via software. The Ethernet+Dante card also offers Dante audio networking capabilities and connection to a wide range of Dante-enabled devices, in order to integrate the IPA 424 T into the Dante network and resolve more complex tasks.

Times are changing; rooms are redivided or rededicated, numbers of attendees increase or decrease based on unforeseen events, but with the IPA Series DSP-supported power amps, your installation is prepared for any situation. Scalability and future-proofing are the biggest advantages of the IPA Series. Its energy efficiency is also ideal thanks to the class-D technology and switchable auto standby.

The IPA 412 T variant with 4 x 120 watts is available for smaller installations.

    Amplifiers
See the product
monisms-MNS-AMP60XXA-2D
  • MONISMS

MONISMS – MNS-AMP60XXA-2D

The MONISMS Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers [Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.] The MONISMS Dante Amplifier Power 60W, 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers.
The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol.


MNS-AMP60XXA-2A MAX power 60W,  Which build-in AC 100-240V [50/60Hz] power module.
Dante Audio Amplifier  can be mounted on a DIN rail or screwed onto a panel or wall for easy installation in a remote closet near the speaker area.

[Model:MNS-AMP6011A-2A] 1 Channel, 60W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMP6012A-2A] 1 Channel, 2*30W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMP6022A-2A] 2 Channels, 2*30W Output, [2 Pairs Speaker Terminals].

    Amplifiers
See the product
DSA-2000Q1
  • Inter-M

Inter-M – DSA-2000Q

DSA-2000Q is a High Performance Class-D Power Amplifier using SMPS power and can reproduce high-quality audio in various environments such as auditorium and performance hall. High quality CLASS-D 4CH Professional Amplifier DSA-2000Q is a High Performance Class-D Power Amplifier using SMPS power and can reproduce high-quality audio in various environments such as auditorium and performance hall.   4CH Dante™ Digital Audio Input You can input 4CH Dante™ digital audio through the network port and 4CH analog audio inputs.   Built-in DSP Parametric 8 band EQ, crossover filtear using HPF and LPF,delay, attack / release adjustable limiter.   Easy control of equipment through front panel with OLED and PC GUI Using OLED and operation switches installed on the front, and DSA-500Q dedicated software, various parameters can be adjusted.   Easy one-touch front dust filter cleaning It is possible to remove the front dust filter easily by separating the ventilator on the front of the equipment by one-touch method.   Simultaneous control of multiple amplifiers via PC GUI The PC GUI allows intuitive manipulation of various functions of the DSP, and simultaneous control of multiple amplifiers through IP registration of the equipments.   Up to 340 ms delay time adjustable When configuring a system with multiple speakers, you can adjust the Delay function to control the audio transmission time up to 340 msec for clear sound.   Frequency band adjustment using HPF and LPF You can use the Butterworth / Bassel / Linkwithz-Riley filter to adjust the frequency band required for your speakers.   Unlimited preset creation for environment-optimization Up to 10 presets can be saved to the internal memory of the device. In addition, environment parameters can be saved to a PC as a file via the PC GUI and can be easily managed without restriction on the number of files.
    Amplifiers
See the product