Cart
← Back to Product Catalog

Mansion – DIC1R13A

I/O Interfaces

More details

Similar Products

Dante官网logo
  • BARE

BARE – D-10D

Features： 1. PoE power supply; 2. Soft key-type user switch to avoid mechanical sound when switching the microphone; 3. The entire expandable Dante system has 512 two-way audio channels; 4. Use a network cable to connect to the switch; 5. There are a variety of switch modes to choose from, a variety of gains are available, and a low-cut switch; 6. Equipped with a 3-pin XLRF canon female socket, suitable for quick installation of any XLRM canon male output gooseneck microphone; The sturdy casing cast by die casting and the non-slip silicon foam at the bottom of the microphone holder can reduce the impact of desktop vibration on the microphone.
    I/O Interfaces
See the product
image007
  • BARE

BARE – DCS-100C/D

1. Exquisite and elegant design, ergonomic, very modern. 2. Original D-net IOT digital conference IoT system technology, in line with IEC60914 international standard 3. With priority button function, you can turn off the representative unit that is speaking. 4. The microphone is equipped with an ultra-quiet electronic touch switch, which can avoid the mechanical sound amplification of the switch, and can control the operation of the microphone. The microphone has a bright luminous halo to indicate the working status. 5. The unique audio processing circuit improves the clarity of the entire system. 6. Fixed square array microphone pole with variable directivity. 7. The chairman unit can use the priority button (Priority) and the approval button (Permit) to control the speaking sequence and control the meeting atmosphere. 8. The self-developed technology of D-net IOT digital conference IOT system realizes five adjustable modes of directivity of the pickup microphone: omnidirectional, cardioid, super-cardioid, sharp-hearted, Figure- 8-pointing type; 9. Two-color LED indicator light, green when speaking; 10. The unit comes with a 2m Category 6 RJ45 network cable; 11. Independently adjust the microphone gain, which can be adjusted on the microphone or computer management software, so that speakers with different volumes can speak more smoothly; 12.1 Ø 3.5 mm stereo headphone jack can be connected to headphones. 13. The unique ID number of the microphone unit can be manually assigned to the conference unit by the conference system.
    I/O Interfaces
See the product
dd-rn31
  • RDL

RDL – DD-RN31

The DD-RN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input, left and right RCA jack inputs and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detachable terminal block. The module is configured and adjusted using RDL CONSOLE or other network control software. The DD-RN31 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-RN31 is PoE powered, and is available in multiple finishes with optional customized graphics.

Mic/Line to network section

The two XLR inputs are each converted to a separate Dante network transmit channel. Gain settings are software-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. P48 phantom voltage may be software enabled when an input is set for mic level.

Line to network section

The Mini-jack and RCA jack left and right inputs each provide a network digital audio level of -18 dBFS for an unbalanced -10 dBV input. The control software allows each of these inputs to feed either or both of two Dante channels. Multiple sources fed to a single Dante output are summed.

Network to line section

Two Dante audio channels are converted to unbalanced line level to feed the front-panel Mini-jack. Each channel provides -10 dBV unbalanced for a network digital audio level of -18 dBFS.

Two Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS.

Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.

The DD-RN31 is a professional grade product with RDL mic preamplifiers for studio quality fidelity and low noise performance, coupled through XLR jacks housed in a steel chassis with dual powder-coated or stainless steel Decora® front plates.

The DD-RN31’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

    I/O Interfaces
  • Dante Ch: 4x4
See the product