Cart
← Back to Product Catalog

Lucky Tone – MA-1000TD

Amplifiers

More details

Similar Products

xta-APA-4E8|xta-APA-4E8
  • XTA

XTA – APA-4E8

The APA Series is a powerful processing platform that tightly integrates with its power supply featuring 96k analogue to digital converters not only on the analogue inputs++ but also directly at the speaker outputs, monitoring voltage and current. Inputs and outputs are simultaneously being processed by the DSP, along with data about the mains supply, allowing APA to adapt and correct to keep your music sounding better than ever. It’s not so difficult to add some DSP into an existing amplifier design, but to fully monitor all aspects of an amplifier’s performance from input XLR (or network port) to speaker terminals – that’s a little more involved… The APA Series can do this. We have designed a power and processing platform that tightly integrates with its power supply featuring 96k analogue to digital converters not only on the analogue inputs++ but also directly at the speaker outputs, monitoring voltage and current. Inputs and outputs are simultaneously being processed by the DSP, along with data about the mains supply, allowing APA to adapt and correct to keep your music sounding better than ever. In addition to this adaptive processing, you still have full control over a powerful suite of filtering and protection, including multiple bands of our legendary dynamic EQ, FIR filtering and phase linearisation, ultra-transparent limiting, and all the classic crossover and EQ components traditionally used to set up your system. Add to this a fully flexible matrix with the ability to source audio either locally from AES or analogue inputs++, or via a networked audio connection (Dante/AVB). With PC remote software also available, you’ll understand why we don’t think this is just an amplifier with some DSP built in… ++AES and analogue inputs standard, network audio inputs is a retro-fit option
    Amplifiers
See the product
coda-audio-Linus14d_1200px|coda-audio-Linus14d_1200px
  • Coda Audio

Coda Audio – Linus14D

The LINUS14D is a four channel DSP, Network, Comparator and Amplifier delivering 4x 3500W of clean power in a light weight 19”/2U package. The LINUS14D is a four channel DSP, Network, Comparator and Amplifier delivering 4x 3500W of clean power in a light weight 19”/2U package. The 4 audio inputs are selectable from Analog, LiNET digital audio or DANTE audio network and are routable to any of the 4 outputs via the input matrix. LINUS14D ENGINE – the class D-IC output stage topology delivers audiophile sonic accuracy with enormous headroom providing significant improvement of the system performance in dynamics and transparency. LINUS CORE – the SHARC floating point DSP processor ensures tremendous processing power enabling the integration of sophisticated audio algorithms. The advanced signal processing includes IIR and phase linear FIR filters for perfect linearity and superior sound performance as well as advanced look-ahead and frequency dependent limiters for increased system headroom and sonic fidelity under heavy use conditions. LiNET – is a robust, redundant audio transport solution that transmits digital audio over a standard CAT5 cable. Up to 8 digital audio signals can be sent to each amplifier via LiNET, buffered and sent to the next unit via the LiNET link out for daisy chaining. The signal routing inside the LINUS14D can be done remotely or using the pushbuttons on the front panel. DANTE – transmit digital audio over an Ethernet based network. COMPARATOR – the LINUS14D provides integrated feedback loop control for sensor controlled subwoofers. The unit has four sensor inputs connected to two 5-pol Neutrik XLR input. The comparator’s electronic circuit loop measures the voice coil movement and adjusts the amplifier driving voltage and/or current to correct any driver inaccuracy. It is a closed feedback-loop and therefore self-optimizing system in which the driver confirms precisely the power it needs to produce exactly the original audio signal. The key advantage is a very extended and controlled response. Any distortion produced by the driver or the enclosure is instantly corrected by the feedback. AUX – integrated evacuation massage contact in accordance with DIN EN 60849. LINUS LIVE – Ethernet based graphical user interface for fast and flexible system configuration, tuning and control. APPLICATIONS Containing factory presets for all CODA Audio loudspeaker systems LINUS14D offers a flexible solution for touring, permanent installation, corporate AV and portable applications.
    Amplifiers
See the product
Cloud-CV-Series-Digital-Amps-iPad-Image
  • Cloud

Cloud – CV Series

The Cloud CV Series includes 3 models - CV2500, CV4250, and CV8125

Cloud CV digital amplifiers are versatile multi-channel power amplifiers of advanced design, able to drive 100 V/70 V line loudspeaker systems directly. They are ideal for sound reinforcement applications in the retail, leisure, hospitality, commercial or industrial sectors. Large installations using multiple amplifiers will benefit from the amplifiers’ network connectivity: each amplifier may be configured individually, controlled and monitored remotely over a standard Ethernet network.

All models include on-board, user-configurable DSP permitting great flexibility of internal architecture, and a wide variety of remote control options including Ethernet, RS-232 and DC: the latter providing compatibility with standard Cloud remote control plates. An important aspect of the design is that “out of the box”, the amplifiers emulate earlier Cloud amplifier designs. It is not necessary to either connect a computer nor remove the lid to access internal jumpers to set primary configuration parameters such as input routing, which may be done using rear panel DIP switches. Where more advanced configuration options are needed, they can be easily accessed through the internal web server and an Ethernet connection to an external device.

    Amplifiers
See the product