Cart
← Back to Product Catalog

Hear Technologies – hear back PRO hub

Personal Mixing & Monitoring

More details

Similar Products

RedNetR1_Overhead_HR
  • Focusrite

Focusrite – RedNet R1 Desktop Controller

RedNet R1 enables users to interact with their audio system like never before. It provides the flexibility to control a range of different monitor output setups, ranging from mono through to 7.1.4 surround, including Dolby Atmos® and other immersive audio workflows. Alternatively, completely custom setups of up to 12 outputs can be configured for bespoke speaker configurations. RedNet R1 can be used to control groups of outputs from a Red interface’s multitude of sources and destinations, including from Pro Tools | HD and other DAWs, analogue inputs and outputs, ADAT and S/PDIF connections, and from entire Dante audio ecosystems, simultaneously and interchangeably.

RedNet R1 supports a maximum of eight input sources from 32 available audio channels, across analogue, digital, DAW and Dante connections, and mixes and routes signals to up to 12 monitor output channels. Top-panel control includes level, reference level preset selection, cut, dim, mute and a variety of solo modes. There’s an A/B switch for switching between numerous monitoring presets, and up to four fold-down presets allow fast switching for checking downmixes. Custom cue mixes can be sent to talent from any of the 32 available inputs.

RedNet R1 also features a Dante-enabled talkback section, internal mic-pre and a high-powered headphones output, so you can interact with your Dante system like never before. Up to four talkback destination groups are available when used with a Red interface. (When used with other Dante devices, a single talkback group is available.) RedNet R1 has an internal microphone, or users can connect their own microphone via the rear-panel XLR. The high-fidelity headphone output is powerful enough to deliver high-SPL audio to high-impedance headphones.

RedNet R1 features two LCD displays for highly accurate level metering of the outputs, sources and headphone outputs, and for giving visual cues for navigating around menus. The unit is configured using RedNet Control 2, the software manager designed primarily for ease of use in quickly setting up both simple and complex monitoring and routing configurations. Other features of the RedNet R1 include a quarter-inch jack socket, which accepts a footswitch for talkback management, LFE muting and more. It can be powered via Ethernet to reduce cabling complexity (using the PoE standard), or by a DC power supply.

    Personal Mixing & Monitoring
  • Dante Ch: 32x12
  • 24-bit
See the product
focusrite-Rednet_X2P_1200px|focusrite-Rednet_X2P_1200px
  • Focusrite

Focusrite – RedNet X2P

RedNet X2P is a compact, robust 2x2 Dante™ interface with Red Evolution mic pres, stereo line out and a stereo headphone amplifier. RedNet X2P is a compact, robust 2x2 Dante™ audio interface featuring two Red Evolution mic pres, stereo line out and a stereo headphone amplifier. RedNet X2P quickly adds I/O to your Focusrite Red interface or any Dante™ audio-over-IP system, and power, audio and remote control are supplied using a single Ethernet cable – simply use a power-over-Ethernet switch or PoE injector. A local input mixer allows 'more me' monitoring control, while a control lockout ensures settings remain unchanged when used remotely. The two digitally-controlled Red Evolution mic pres provide large amounts of ultra-clean gain along with stereo linking, individual phantom power, a high-pass filter and phase reverse. Plus they include Air mode, emulating the sound of Focusrite’s classic transformer-based mic preamps. RedNet X2P provides high-performance audio conversion with over 118dB dynamic range. These converters have been expertly selected and calibrated to provide the best balance of sound quality, dynamic range and conversion latency.
    Personal Mixing & Monitoring
  • Dante Ch: 2x2
  • 24-bit
See the product
studer-onair-3000-modulo_600px|studer-onair-3000-modulo_600px
  • Studer

Studer – OnAir 3000 Modulo

The Studer OnAir 3000 further extends Studer’s range of digital broadcast consoles with a completely new design aimed at the medium to upper segment of the radio market including private and public network broadcast stations. The Studer OnAir 3000 further extends Studer’s range of digital broadcast consoles with a completely new design aimed at the medium to upper segment of the radio market including private and public network broadcast stations. The operating concept of the OnAir 3000 will be totally familiar to Studer users, as the wide range of compact and elegant control surface modules incorporates the same patented “Touch-n-Action” philosophy as the highly successful Studer OnAir 2000, using colour GUI screens. The OnAir 3000 design is based on a completely modular desk and a separate DSP engine. The fader module includes six fader strips, and up to eight fader modules may be fitted, giving a maximum console size of 48 faders. Layout options range from a highly comprehensive engineer-operated continuity console to a single fader panel for DJ and newsroom use or even a PC-operated system with no physical desk controls. The console has three main stereo mix buses plus an audition facility, four stereo AUX buses, 16 mix-minus sends, configurable as AUXes and three independent studio monitoring circuits and offers full dynamics, EQ and input/output routing in each channel.
    Personal Mixing & Monitoring
  • Dante Ch: 64x64
See the product