Cart
← Back to Product Catalog

FRENETIK – Spik 6

Speakers

More details

Similar Products
  • SoundTube

IPD-TSB2.0 STNet Dante-Enabled Soundbar

An ultra-thin 2-way Dante-enabled digital end-point solution in a soundbar configuration. Measuring only 1.5 inches thick where the bar meets the TV, the soundbar incorporates a right and left speaker with four 3-inch polypropylene woofers with NBR surrounds, four bass radiators, and two 0.75-inch synthetic soft dome tweeters.
    Speakers
  • Dante Ch: 2 In
  • AES67 Enabled
See the product
s215
  • Cadac

Cadac – S215

The S215 is a self-powered high-end subwoofer, which features 2 x 15" ported woofers. The power output of 4000 W (RMS) ensures for © very high SPL down to a frequency of 40 Hz. It can be combined with all products of the CADAC range and be used as subwoofer extension in ground stack configuration for point sources or line arrays and can be also used as ground stack horizontal subwoofer array. The DSP-electronic has 2 power amplifiers and 2 DSP channels. Internally, one S215 has 2 amplifier and 2 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the dispersion can be adjusted and optimized according to the listener area for the application of subwoofer arrays. CMAP enables to create arbitrary radiation patterns for the listener area with ground stack horizontal arrays.

    Speakers
See the product
CX112P
  • DMIX

DMIX – CX112P

Speaker model: CX112P

Speaker type: 12”Active coaxial loudspeaker

Unit configuration: LF：12" unit 2.5"(65mm）Voice coil

HF：1.7"（44mm）Voice coil driver

Frequency response: 70Hz-17kHz(-10dB)

Rated power: LF：250W， HF：50W

Sensitivity: LF：101dB， HF：109dB

Sound pressure level： 131dB (peak)

Radiation Angle: 60°×60°

Crossover point: DSP control

Size (mm) : 583×376×377 (W×H×D)

Module amplifier power: HF：150W，LF：500W (Class D)

Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output

Module DSP control: RS485、USB or Dante

    Speakers
See the product