Cart
← Back to Product Catalog

Extron – DMP 128 AT

I/O Interfaces

Similar Products

CgAGfFw9VJ2ANRm1AADGmj4xFh8861
  • Soundking

Soundking – CXA036

This Dante adapter is designed with one RJ45 Dante input and two XLR analog outputs. This product enables simple connection of analog equipment to a Dante network, and can  receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analog audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor(DSP), or other analog audio equipment.

Analog output version:Dante signal turns into analog audio signal output, when connecting an amplifier, a speaker, etc.

Analog input version: analog audio signal turns into Dante signal output, which is suitable for mixer, instrument, etc.

As with other Dante products, the freely available Dante Controller software application is used to automatically discover and configure Dante analog output module to the Dante network. Device names, channel labels, signal routing and other parameters(for example, sample rate and latency) can be configured via the network using Dante Controller. A variety of network and clock synchronisation diagnostic tools are also available in Dante Controller.

This Dante adapter uses Power over Ethernet(PoE). Power can be provided from a PoE-capable network switch, or from a separate PoE injector.

    I/O Interfaces
See the product
Ecler - WP22DN
  • Ecler NEEC Audio Barcelona

Ecler – WP22DN

WP22DN is a wall panel interface with Dante™ and AES67 digital audio transport protocols compatibility.

It features 2 audio MIC/LINE Combo connector inputs in its frontal panel and 2 Dante™ conversion channels either directly or by the sum of the analogue inputs channels (stereo to mono conversion). Also, it features 2 analogue outputs with duplicated connectors in XLR format for the front panel and Euroblock on the rear panel, both linked to 2 Dante™ channels coming from the local network. It supports PoE supply or local power supply.

    I/O Interfaces
See the product
mansion-DIC4E3A|mansion-DIC4E3A
  • Mansion

Mansion – DIC4E43A

DIC4E43A is a high quality Dante interface box for converting four Dante channels to Analogue Audio outputs, and four Analogue Audio inputs to Dante network. DIC4E43A is a high quality Dante interface box for converting four Dante channels to Analogue Audio outputs, and four Analogue Audio inputs to Dante network. Features
  • Provides Dante Interface for Four Inputs / Outputs
  • Four Standard MIC or LINE Audio Channels Converts to Dante Network
  • MIC/LINE selectable on Each Input
  • Gain Control on Each Input
  • Provides 48V Phantom Power for Each Condenser Microphone Input
  • Accepts Balanced or Unbalanced Signal Inputs
  • Each Audio Input Signal LED on Front Panel
  • Each Audio Output Signal LED on Front Panel
  • Four Balanced Audio Output Line Level from Dante Network
  • High Resolution 24 Bit Converts Analog to Digital and Digital to Analog
  • LEDs Indicate the Status for Power and Network Sync
  • Powered by External 24VDC Power Supply
  • Normal Operation with PoE Enable Network Switch
    I/O Interfaces
See the product