Cart
← Back to Product Catalog

DM7

Mixers

Learn more

Similar Products
  • RDL

RU-NMP44

The RU-NMP44 is a network mixing processor containing six virtual audio mixers controlled by network commands from RDL and other network remote controls. Each mixer operates independently with input signal attenuation from unity to off. The output level from each mixer is independently adjustable from unity to off. Based on the commands sent to the RU-NMP44, each mixer can be used as a mixer, a source selector, a priority paging inserter and/or as a volume control. The outputs from four of the mixers drive corresponding network audio channels. The outputs from two of the mixers drive line-level +4 dBu audio outputs. The RU-NMP44 is configured using RDL CONSOLE or other network control software. If ducking is used, one of the four network audio inputs is assigned as the priority input. That input is connected to all six virtual mixers. An audio detector with installer-defined threshold and recovery delay may be assigned to one, several, or all of the six mixers. For each of those mixers, the priority input is set to a defined level, and the remaining three inputs are each set to attenuate to a fixed level between -10 and -64 dB when a message is detected on the priority input. If hum is anticipated from the paging source, one of four high-pass filter may be enabled. Up to four preset configurations may be stored in the RU-NMP44. Each preset can define any or all mixer level settings. A preset is activated by a network command, an RDL network or wired remote control, a momentary switch closure or a compatible open-collector from other equipment. The RU-NMP44 may be configured to power up to a preset, to the last settings used, or with all levels “off”. The RU-NMP44 may be powered from an external 24 Vdc power supply, available separately. The RU-NMP44 is equipped to operate from a PoE enabled network switch. The RU-NMP44 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-NMP44, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. The RU-NMP44 is ideal for adding volume control, mixing, switching and ducking to existing network audio systems. The digital signal processing offered in the RU-NMP44 often fulfills all the requirements for an audio system design, such as in classrooms, meeting rooms, restaurants/bars, fitness gyms and retail stores. The RU-NMP44’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. The RU-NMP44 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.
    Mixers
  • Dante Ch: 4x4
  • 24-bit
See the product
steffens-mastertone-2-0
  • Steffens Systems

Steffens Systems – Mastertone 2.0

Mastertone is a modular digital audio mixing matrix with a wide range of signal processing features. Mastertone is a modular digital audio mixing matrix with a wide range of signal processing features. The standard configuration offers 8 analogue inputs and 8 analogue outputs and can be extended by up to 8 additional inputs and 8 outputs (analogue or AES) plus 16 DANTE inputs and 16 DANTE outputs. As the core component of an audio system, Mastertone delivers a comprehensive featureset including delays, parametric equalizers, compressors, channel grouping, phantom power and more. Additionally, the sophisticated Open Microphone Controller (OMC) automatically attenuates microphones that are currently not actively in use, providing unclipped speech with maximum resistance to feedback. The responsive touchscreen display enables easy access to standard functions such as preset recall. Mastertone can be configured, controlled and monitored via dedicated software using the built-in network interface. This interface also facilitates external control of the Mastertone by third party control systems. Superb audio quality is assured by the inclusion of premium convertors, state of the art processing and advanced algorithms throughout the signal processing chain.
    Mixers
See the product
soundcraft-si-impact_1200px|soundcraft-si-impact_1200px
  • Soundcraft

Soundcraft – Si Impact

Drawing on over 40 years experience in live sound mixing, Si Impact brings the latest digital mix innovations together with the unrivalled sound quality of Soundcraft.  Drawing on over 40 years experience in live sound mixing, Si Impact brings the latest digital mix innovations together with the unrivalled sound quality of Soundcraft. Designed to be as simple as an analog mixer, but offer radical workflow enhancements such as the unique FaderGlow™ system, massive DSP power, and a pristine 32-in/32-out USB audio interface, Si Impact delivers digital live sound mixing and recording for those who refuse to compromise on audio quality. Key Features:
  • 32 Mic Inputs
  • 8 XLR/1/4" Combi-jacks for line inputs and instruments
  • 40 DSP input channels (32 mono inputs and 4 stereo channels/returns)
  • 31 Output busses (All with full DSP processing and GEQ)
  • 4-band Fully Parametric EQ on each channel and bus
  • 8 VCAs + 8 Mute groups
  • 26 motorised faders (24 input + LR/Mono)
  • 4 fully customisable Fader Layers
  • Built-in Stagebox Connectivity
  • 5" touchscreen display
  • Multi-Colour LCD Channel Displays on each input fader
  • 4 studio-grade Lexicon Effects engines and dedicated FX busses
  • BSS Graphic Equalisers on every bus
  • 20 sub-group / aux busses
  • 4 mono/stereo matrix busses
  • 32x32 USB audio interface for multi-track recording and playback
    Mixers
  • Dante Ch: 64x64
See the product