RU-NMP44


Learn more

Similar Products

RIVAGE_PM_CS-R5_Front
  • Yamaha

Yamaha – CS-R5

"The CS-R5 control surface is the core component of RIVAGE PM5 system. The console has three touch screens and 12-faders bays for flexible setup and configuration. Touch panels are brought closer to the user, making them easier to reach. The weight is 42 kg which is incredibly light.

Display: 15″ touch panel x 3

Faders: 38 (12+12+12+2)

Custom Fader banks: 6x5 on each bay

User Defined keys: 12x4 banks

User Defined knobs: 3(4x4 banks can be assigned)

Touch and Turn knobs: 3

Analog I/O: 8in/8out

Slot: 2 MY slots

AES/EBU: 4in/4out (with SRC)

Ports: GPI (8in/8out), MIDI In/Out, 5 USB (1 for 2-track recording)

Power supply: Dual redundant power supply built-in

Dimensions (WxHxD): 1,444 x 414 x 643mm (56.9"" x 16.2"" x 25.3"")

Net Weight: 42 kg (92.6 lbs)"

    Mixers
  • Dante Ch: 144x144
  • 32-bit
calrec-apollo_1200px|calrec-apollo_1200px
  • Calrec

Calrec – Apollo

Apollo provides unsurpassed processing power and a control surface with displays, touch screens and light-emitting knobs which detail function and status. Apollo provides unsurpassed processing power and a control surface with displays, touch screens and light-emitting knobs which detail function and status. Apollo utilises Bluefin2, the next generation of Bluefin HDSP, which provides unrivalled resources of up to 1020 channel processing paths, 128 program busses, 96 IFB/Track outputs and 48 auxes. With single and dual fader options, Apollo can squeeze in more faders into a single footprint that any other console, and its integrated router provides total network flexibility. Apollo’s I/O functions are performed by the Hydra2 network, which uses high capacity 8192² cross-point routers and a variety of I/O units.
    Mixers
  • Dante Ch: 64x64
ctp-systems-DMIX30|ctp-systems-DMIX30
  • CTP Systems

CTP Systems – DMIX30

The DMIX30 is a Dante enabled mixer which includes six discreet five into one mixers. All audio inputs and outputs are assignable via the Dante network and have adjustable gain from off to +12dB. Additional gain of +20dB may be switched to each input allowing a maximum of +44dB gain. All mixers include a switchable limiter with threshold adjustment. The DMIX30 is a Dante enabled mixer which includes six discreet five into one mixers. All audio inputs and outputs are assignable via the Dante network and have adjustable gain from off to +12dB. Additional gain of +20dB may be switched to each input allowing a maximum of +44dB gain. All mixers include a switchable limiter with threshold adjustment. All six mixers have TFT bargraph metering which may be selected to either dBFS or PPM metering scales with appropriate ballistics.  The six mixer outputs are available over the Dante network but also as balanced analogue XLR outputs on the rear of the unit.  The secondary Dante network connector can be selected to operate either in redundant mode or as a switch output to daisy chain to more Dante equipped devices.  A special feature of this unit is that any or all of the mixers may be remote controlled. The unit can accept up to six separate remotes each of which is assignable to any of or any combination of the mixers. Perfect for controlling remote sources such as radio talkback feeds.  The data from the remotes is encoded in a modified 'time code' signal so may be carried over any standard audio transport, including audio fibre channels. The remotes are available separately so may be added if and when required. The unit operates on 110-240VAC 50/60Hz with auto switching. Dimensions: 2RU 150mm deep.
    Mixers