Cart
← Back to Product Catalog

Digital Audio Labs – LIVEMIX LM-DANTE-EXP2

Dante Interface Cards

More details

Similar Products

williams-sound-hhs-dm32|williams-sound-hhs-dm32
  • Williams AV

Williams Sound – HHS DM32

This product has reached “end-of-life”. Optional conversion of Analog Server (HHS 108/116/124/132) to Dante™ 32 mono / 16 stereo inputs. Server unit must be returned to Williams Sound for conversion.  This product has reached “end-of-life”. Optional conversion of Analog Server (HHS 108/116/124/132) to Dante™ 32 mono / 16 stereo inputs. Server unit must be returned to Williams Sound for conversion. 
    Dante Interface Cards
See the product
musicrown-dmh-dsp
  • Musicrown

Musicrown – DMH DSP

Musicrown's DMH DSP is a Dante interface card.  Musicrown's DMH DSP is a Dante interface card. 
  • 32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.
  • 8X8 core matrix, which includes 4 local input channels, 4 local output channels, 4 Dante input channels and 4 output channels.
  • Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup. Digital audio channel can support 4IN/4OUT, using 24-bit precision and extremely low network latency.
  • Input including low-cut, 5 band PEQ, noise gate, gain, mute, phase, link adjustment and volume adjustment.
  • Output including X-over, 7 band PEQ, Gain, mute, compressor/limiter, phase, delay and link adjustment and volume adjustment.
  • All PEQ Gain, bandwidth, frequency continues adjustment. Type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.
  • All high cut, low-cut filter type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.
  • Noise gate's threshold, time, ratio can be adjustment for inputs, compressor, limiter, ratio, time can be adjustment for outputs.
  • Maximal delay time 680mS for all input/output channels.
  • Inside single generator(pink, white noise and 20~20K sine wave, amplitude adjustable ).
  • Hardware with 7 channel I/O monitor, 4 channels support AD sampling potentiometer, 3 channels I/O support temperature, level, fault sampling function.
  • 21 user presets, device and each preset can be save and recall alone. Password protection function for high level applications.
  • PC software support Dante port link, and display automatically searched IP address at rear time. One-button linkage easy for use’s operation more convenient and swift.
  • Module power supply is DC5V 2A.
  • Module size is 135mmx52mm.
DMH Series:
  • DMH 2.0 - 2 analog input, 2 Dante output
  • DMH 0.2 - 2 analog output, 2 Dante input
  • DMH 2.2 - 2 analog input/output, 2 Dante input/output
  • DMH 4.0 - 4 analog input, 4 Dante output
  • DMH 0.4 - 4 analog output, 4 Dante input
  • DMH 4.4 - 4 analog input/output, 4 Dante input/output
    Dante Interface Cards
See the product
DD2_Persp-Frontal
  • Equipson

Equipson – DD2

DANTE interface with 2 inputs and 2 outputs.

Transmitter/Receiver 2IN x 2OUT of DANTE TM . The DD2 is capable of converting up to two mono analog channels to DANTE TM , or converting up to two mono DANTE TM channels to analog.

The DD2 is a device designed to be used in fixed installation, and consists of balanced inputs and outputs with 3.5mm Euroblock connectors.

The device can be powered by both PoE and an external power supply.

Characteristics

Euroblock 3.5 mm connectors for analog signal.

Configurable with DANTE Controller.

External power supply or PoE.

    Dante Interface Cards
See the product