Cart
← Back to Product Catalog

DARK DAWN 1616M

I/O Interfaces

More Details

Similar Products

yamaha_rmio64d_front-rear|yamaha_rmio64d_front-rear
  • Yamaha

Yamaha – RMio64-D

The RMio64-D remote rack enables audio from a Yamaha CL or QL console to be converted to MADI and fed to an OB vehicle, for example, or a MADI based console can be easily integrated into a NUAGE system for post production. The RMio64-D remote rack enables audio from a Yamaha CL or QL console to be converted to MADI and fed to an OB vehicle, for example, or a MADI based console can be easily integrated into a NUAGE system for post production. Word clock synchronization can be an issue when converting between different audio formats, but with The RMio64-D MADI built-in inputs and outputs built-in eliminate the problem of word clock synchronization when converting between different audio formats. Sample rate conversion sources with differing word clocks can be connected without causing noise or dropouts. In addition to redundant Dante network connections, the RMio64-D also supports MADI redundancy through simultaneous coaxial and optical connections. With the MADI Split (loopback) capability, a signal received at either the coaxial or optical input can now be retransmitted to the output.
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
See the product
clockaudio-cdt-100_600px
  • Clockaudio

Clockaudio – CDT 100

The Clockaudio Dante Transporter is an advanced professional Dante communication product which combines audio and control transport using network based Dante protocol. By taking advantage of the advanced Dante technology and based on the high performance and pre-configurable hardware platform, this product transfers audio and control signals via widely used Ethernet and is able to guarantee perfect sound quality. The CDT 100 has a variety of uses including but not limited to boardrooms, conference rooms, video conference rooms and any place else where multiple table microphones and control devices are connected back to the AV equipment cabinet. Features
  • Easy to install with under table mounting
  • Audio and control signals transported over Dante
  • 4 audio inputs, multiple units may be daisy chained (maximum of 6 units on a single CAT-5)
  • Provides Phantom Power for each mic input
  • 4 control inputs compatible with all Clockaudio devices including:
    • direct connection to CH32 LItetouch switch & LED, TS001, Retracta CRM202S-RF, CS-S Series, SM80S, S80S
    • direct connection to ARM-C controller
  • Open API for interfacing with Control Systems
  • Compatible with any Dante capable audio DSP
    I/O Interfaces
  • Dante Ch: 2x4
  • 24-bit
See the product
Iyo_Dante_32.32MD
  • AudioScience

AudioScience – Iyo Dante 32.32MD

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format.

The 32.32MD provides 32x32 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. With DB-25/AES59 terminations.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

    I/O Interfaces
  • Dante Ch: 32x32
  • 24-bit
See the product