Cart
← Back to Product Catalog

CS352D-ADSP

Amplifiers

More details

Similar Products

CgAH6F_pWhOAdSKGAAC310gLzwI133
  • Soundking

Soundking – AKT2000D

AK series Dante network amplifier, with analog /digital automatic backup switching function, the analog signal will switch automatically when there is a problem with the digital signal, ensuring that the signal is not terminated due to device failure. The product is divided into two channel and four channel two specifications, using Dante, AES digital audio input, 10 channel signal input can be matrix selection and mutual thermal backup, intelligent network monitoring, and center control. PFC switch power supply, high performance DSP sound control with FIR balance, AGC automatic overload protection, square wave self-load impedance suppression. Intelligent temperature control with overheat protection, constant resistance and constant pressure.

※Optional functions: remote switch, center control shutdown, remote maintenance, sound channel backup, speaker intelligent control and others.

Applications: Acoustic systems in large government projects, large stadiums, cultural centers, etc.

    Amplifiers
See the product
ashly-nXe-1.52_600px
  • Ashly Audio

Ashly – nXe1.52bd

The nXe1.52bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors is Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 2x0
See the product
aurora-dtx-amp1|aurora-dtx-amp1
  • Aurora Multimedia

Aurora Multimedia – DTX-AMP1

The DTX-AMP1 is the world’s first PoE++ 2x35 watt Dante ® amplifier to integrate IP control and audio DSP functionality. The audio DSP allows parametric equalization, noise reduction, mixing, volume control, audio ducking, and more. The DTX-AMP1 is the world’s first PoE++ 2x35 watt Dante ® amplifier to integrate IP control and audio DSP functionality. The audio DSP allows parametric equalization, noise reduction, mixing, volume control, audio ducking, and more. The IP control allows for any 3 rd party control system to use the DTX-AMP1 RS- 232, IR, Digital I/O, and relays as a IP port expander.  Aurora’s DTX-AMP1 also has a variety of audio inputs and outputs with two balanced L/R line inputs, one of which can be selected as 2 independent L/R unbalanced inputs, L/R balanced line output, S/PDIF, and L/R amplifier output. The amplifier will operate at full power with external power supply of 70W total. Depending on PoE class type connected, the DTX-AMP1 can supply up to 60W of total power
    Amplifiers
  • Dante Ch: 2x0
See the product