Cart
← Back to Product Catalog

Brick4.4

I/O Interfaces, Microphone Preamps

More Details

Similar Products
  • Stewart Audio

Stewart Audio – NETAV I/O 2×2

NetAV I/O 2x2 is a network enabled bridge product with 2 channels of analog to digital on to the network and 2 channels of digital to analog off of the network. This simple product is ideal for integrating legacy devices into your Dante network.
  • Sub Compact 1/4 rack package
  • Two mic/line inputs with selectable pre-gain and phantom power
  • Two analog outputs from Dante Network
  • Configurable via Control Center Software
  • External inline power supply
  • Made in the USA
    I/O Interfaces
See the product
rdl-sf-xmn4
  • RDL

RDL – SF-XMN4

The SF-XMN4 is an interface that converts four XLR microphone inputs to Dante network audio channels.  The SF-XMN4 is an interface that converts four XLR microphone inputs to Dante network audio channels. Special software is not required to configure the SF-XMN4. Each XLR input is equipped with a switch to set the gain for dynamic or condenser microphones. A dual-LED VU meter displays the level for each input to facilitate selection of the ideal gain range. P48 phantom voltage is supplied to each microphone input. The SF-XMN4 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance. The SF-XMN4 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit. The SF-XMN4 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems. Features:
  • Dante Network Interface for Four Audio Mic Inputs
  • Each XLR Input Provides Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
  • 48 V Mic Phantom (P48) on each input
  • Four XLR Front-Panel Inputs
  • Converts Four Standard XLR Mic or Line Audio Sources to Dante Network Channels
  • Special Software Not Required for Module Setup
  • High Resolution 24 Bit Analog to Digital Conversion
  • LED Indicator for Valid Power and Network Sync
  • Operation from PoE Power (Class 0, IEEE 802.3af)
  • Equipped for SysFlex™ Rack Mounting or Surface Mounting
    I/O Interfaces
See the product
arista-ars-0202-a11
  • Arista

Arista – ARS-0202-A11

E-Vocal DUO+ is a dual channel analog input and dual channels analog output Dante converter.

The product consists of four models:

  • E-Vocal ARS-0202-A00
  • E-Vocal ARS-0202-B00
  • E-Vocal ARS-0202-A11
  • E-Vocal ARS-0202-B11

E-Vocal ARS-0202-A11 connects your legacy audio gear to the Dante ® world. It allows two channels of audio analog inputs to be integrated into a Dante ® network and converts a Dante ® stream into two channels of analog audio output signals. It has two XLR microphone inputs with an adjustable gain control preamplifier for studio quality fidelity and low noise performance dynamic or condenser microphones. Two audio signal outputs allow Lip-Sync delay of up to 170 ms/ch (fs = 48 kHz) to synchronize the audio stream to the video stream. It has a built-in web-based controller for microphone gain control and Lip-Sync delay control. It has an RJ45 copper network interface and can be powered by PoE or 12VDC. Dante DUO+ has a rubber protection shell and rack mount brackets as optional items. More info: https://www.aristaproav.com/product/duo-plus/

    I/O Interfaces
See the product