Cart
← Back to Product Catalog

Biamp – NPX H1100

Intercoms

More details

Similar Products

glensound-gs-fw012-ip_600px|glensound-gs-fw012-ip_600px
  • Glensound

Glensound – GS-FW012 ip

The GS-FW012 ip is the Dante network audio version of the GS-FW012 4W unit. The GS-FW012 ip is the Dante network audio version of the GS-FW012 4W unit.   There are still four inputs for the top panel loudspeaker or headphone monitoring, each with their own level controls and each being derived from the Dante network.  There are still four talkback outputs each being routed to the Dante network. Both the inputs and outputs are presented via a single rear panel Neutricon RJ45/CAT5 connection that is Dante/AES67 compliant. The four talkback outputs are identical.  Each has a 3 position lever key talk switch that is either off, locked on, or in a sprung push to talk mode.  The output of each circuit can be off unless the talkback button is pressed, looping the the associated Dante input input, or outputting the local cue input. The local cue input is presented on XLR and has it's own level pot for the speaker or headphone monitoring. A good quality microphone amplifier with adjustable gain followed by a compressor limiter is built into the unit making its talkback outputs to the Dante network crystal clear. Conversion of the audio signals to/ from the Dante network are by low noise, high bandwidth 48K 24bit converters providing superb performance.  
    Intercoms
See the product
Beatrice_MOTO_Angle_BAN
  • Glensound

Glensound – Beatrice M1

The Glensound BEATRICE M1 is a robust interface for connecting wireless radios and walkie talkies to a Beatrice intercom. It has 4* audio inputs from the network and features crystal clear audio. It is designed for broadcast, theatre and professional audio pplications.

The M1 is part of the Beatrice intercom system that utilises the reliable and proven Dante® network audio transmission protocol to allow real time distribution of uncompressed audio across standard networks. As such the BEATRICE M1 is also fully compatible with other manufacturers’ equipment using the Dante® protocol.

Being able to interface a network audio intercom to low cost wireless radios and walkie talkies provides a real benefit to small theatres and studios. The low price point of walkie talkies combined with the features of Beatrice makes this a great solution for the technician and accountant alike.

    Intercoms
  • Dante Ch: 4x1
  • 24-bit
See the product
studio-technologies-model-373A
  • Studio Technologies

Studio Technologies – Model 373A Intercom Beltpack

The Model 373A Intercom Beltpack is a highly compact user-worn device that combines a single channel of talk and two channels of listen. The unit begins with the features offered by traditional analog party-line (PL) intercom user devices and adds a range of new capabilities, along with the advanced performance and flexibility that Dante® audio-over-Ethernet provides. Over a standard IP network, multiple Model 373A and other compatible Studio Technologies' beltpack units can be used to create party-line intercom applications with help from an external Dante-enabled audio matrix such as the Studio Technologies' Model 5422 Dante Intercom Audio Engine. Alternately, Model 373A units can be used "point-to-point" or interfaced with Dante-compatible matrix intercom systems.

Key Features

  • Dante audio-over-Ethernet technology
  • One talk and two listen channels
  • Supports dynamic and electret microphones
  • 4-pin male XLR headset connector
  • 3.5 mm 4-conductor TRRS headset connector
  • Call receive and display function
  • Excellent audio quality
  • Uses STcontroller for configuration
  • AES67 and Dante Domain Manager™ (DDM) support
  • Power-over-Ethernet (PoE) powered
    Intercoms
  • Dante Ch: 2x1
  • 24-bit
See the product