Cart
← Back to Product Catalog

Behringer – WING-DANTE

Dante Interface Cards

More details

Similar Products

Bose_-_PowerMatch_Dante|Bose_-_PowerMatch_Dante
  • Bose Professional

Bose – PowerMatch Dante

The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate®. Eight output channels are available for diagnostic monitoring from remote locations. The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate®. Eight output channels are available for diagnostic monitoring from remote locations. The Dante network card is installed into the digital expansion slot of the amplifier and includes a primary and secondary Gigabit Ethernet port. The secondary port can be configured for switched (default), redundant, or filtered for legacy product network connections. Up to 10 devices can be daisy-chained using the switched port configuration.
    Dante Interface Cards
  • Dante Ch: 8x8
  • 24-bit
See the product
M3WDK
  • Audix

Audix – M3DK

The M3DK is a convenient kit that pairs the Audix M3 hanging ceiling microphone with the Audix DN43 Dante | AES67 microphone interface, providing a simple to install, network-ready way to stream Audix audio performance through Ethernet networks.

The M3 is an innovative, tri-element hanging microphone designed for applications where aesthetics, sound quality, and ease of installation are critical. The frequency response and polar pattern of its three phase-coherent hypercardioid capsules are tailored for voice clarity and rejection of extraneous noise. 

The Audix DN43 interface features one microphone port engineered exclusively for the Audix M3 tri-element microphone and one port for Audix RJ45-equipped single-element microphones. Each channel has selectable, independently controlled pre-amp gain, as well as low- and high-pass filters. It features balanced audio inputs with RFI filtering and delivers high-fidelity 24-bit, 48KHz audio.

    Dante Interface Cards
See the product
  • RDL

RDL RN22

RDL has released a line of five single-gang Dante interfaces. The D Series-RN22 and D Series-RN2ML are 2x2 wall-mounted, bidirectional mic/line Dante interfaces, the D Series-RN12 is a 1x2 wall-mounted, bidirectional mic/line Dante interface and the D Series-RN02 is a 0x2 wall-mounted Dante interface. The fifth model – the D Series-BTN21 wall-mounted Bluetooth Dante interface – will be released soon. The models come with a variety of features that are said to help with installation and configuration, including network control of gain, attenuation, phantom power and channel summing, and additional rear-panel inputs and outputs on detachable wiring blocks. The units are available in multiple finishes including black, white and stainless steel. Custom labels can be created and ordered online, and the interfaces fit a standard US single-gang electrical box or can be used with the RDL EP-1 adapter for mounting in EU/UK back boxes. To support the Dante interfaces, the manufacturer has also added two network remote controls: the D-NMC1R and D-NLC1R. These single-gang wall-mounted controllers allow end users to control a wide range of parameters using a simple rotary knob, including volume, presets, muting and Bluetooth settings. Visual feedback is provided through LEDs on the D-NLC1R or an integrated full-colour LCD display on the D-NMC1R.
    Dante Interface Cards
  • Dante Ch: 2x2
  • 24-bit
See the product