B16 MOTHERSHIP


More Details

Similar Products

RedNet_A16R_MkII_front_HR
  • Focusrite

Focusrite – RedNet A16R MkII

RedNet A16R MkII is a 16-channel analogue Interface for Dante networks, with two channels of AES3 I/O. Individual input and output channel level controls allow for precise adjustment of all I/O levels using RedNet Control. With two power supplies and primary and secondary etherCON network connectors, RedNet A16R MkII is perfect for critical-path applications in recording, post-production, live sound and broadcast. Built-in redundancy features allow for silent fail-over in the event of power or network outage, providing reassurance for system technicians.

Analogue inputs and outputs are connected through four rear-panel AES59-configured DB25 connectors, while an additional pair of AES3 I/O is provided through male and female XLR for added flexibility. The XLR input can accept DARS signals in addition to AES3. Word Clock I/O on BNC connectors allows external devices to clock to RedNet A16R MkII, or alternatively allows RedNet A16R MkII to act as a network clock grand master, synchronised to external input. RedNet A16R MkII is well suited to permanent installation and repeated strike and setup: all connectors lock and remain terminated even under stress, providing worry-free installation and peace of mind once situated in a rack. In addition, all Focusrite Pro products come with a three-year warranty and award-winning customer support.

    I/O Interfaces
rcf-cr16-nd_1200px|rcf-cr16-nd_1200px
  • RCF

RCF – CR 16-ND

The CR 16-ND is a 10 Unit flight case designed to control the HDL 50-A line array system.  The CR 16-ND is a 10 Unit flight case designed to control the HDL 50-A line array system. The CR 16-ND includes one Control 8 that manages the RDNet connection to up to 256 devices, one DX 1616 matrix processor that takes care of audio signals routing and processing and one CP 16 control panel to bring audio and control signals to 4 x LK 25 multipin outputs. Each LK 25 has four audio channels, two RDNet channels and two spare sends. Each signal is doubled to XLR redundant outputs.
    I/O Interfaces
fohhn-abx-5_1200px|fohhn-abx-5_1200px
  • Fohhn

Fohhn – ABX-5

The ABX-5 can be used as an interface between Dante™ audio networking and the modular active FOHHN FOCUS VENUE loudspeaker system and as a Dante™ to AES/EBU Breakout module and FOHHN-NET Ethernet adapter. The ABX-5 can be used in two ways: 1. As an interface between Dante™ audio networking and the modular active FOHHN FOCUS VENUE loudspeaker system. In this situation, the ABX-5 does not need an additional external power supply. 2. As a Dante™ to AES/EBU Breakout module and FOHHN-NET Ethernet adapter. In both cases FOHHN-NET control signals will be transmitted via Ethernet. The ABX-5 is equipped with a Dante™ Brooklyn II module. It has a Dante™ Primary and Secondary port for redundant applications.
    I/O Interfaces