Product Information
AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations.
Similar Products
- Powersoft
Powersoft – DSP LOTO
DSP LOTO is a 1-2 in/4 out processing board specifically designed to provide advanced DSP functions to any powered product.
DSP LOTO is a 1-2 in/4 out processing board specifically designed to provide advanced DSP functions to any powered product.
Featuring the same characteristics of the high-end X Series platform, LOTO delivers up to 2 sec of input delay, multi-layer input and output EQ, parametric raised cosine filters, custom FIR and IIR equalizers, as well as TruePower™, RMS and Peak limiters, Active DampingControl™, and Live Impedance.
Loto is available in 2 different flavors: Basic and Advanced, both of which are completely supported and managed via ArmoníaPlus.
- Dante Interface Cards
- Musicrown
Musicrown – DMH DSP
Musicrown's DMH DSP is a Dante interface card.
Musicrown's DMH DSP is a Dante interface card.
- 32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.
- 8X8 core matrix, which includes 4 local input channels, 4 local output channels, 4 Dante input channels and 4 output channels.
- Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup. Digital audio channel can support 4IN/4OUT, using 24-bit precision and extremely low network latency.
- Input including low-cut, 5 band PEQ, noise gate, gain, mute, phase, link adjustment and volume adjustment.
- Output including X-over, 7 band PEQ, Gain, mute, compressor/limiter, phase, delay and link adjustment and volume adjustment.
- All PEQ Gain, bandwidth, frequency continues adjustment. Type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.
- All high cut, low-cut filter type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.
- Noise gate's threshold, time, ratio can be adjustment for inputs, compressor, limiter, ratio, time can be adjustment for outputs.
- Maximal delay time 680mS for all input/output channels.
- Inside single generator(pink, white noise and 20~20K sine wave, amplitude adjustable ).
- Hardware with 7 channel I/O monitor, 4 channels support AD sampling potentiometer, 3 channels I/O support temperature, level, fault sampling function.
- 21 user presets, device and each preset can be save and recall alone. Password protection function for high level applications.
- PC software support Dante port link, and display automatically searched IP address at rear time. One-button linkage easy for use’s operation more convenient and swift.
- Module power supply is DC5V 2A.
- Module size is 135mmx52mm.
- DMH 2.0 - 2 analog input, 2 Dante output
- DMH 0.2 - 2 analog output, 2 Dante input
- DMH 2.2 - 2 analog input/output, 2 Dante input/output
- DMH 4.0 - 4 analog input, 4 Dante output
- DMH 0.4 - 4 analog output, 4 Dante input
- DMH 4.4 - 4 analog input/output, 4 Dante input/output
- Dante Interface Cards
- Roland
Roland – XI-DANTE Expansion Interface
The Roland XI-DANTE expansion interface card enables the Roland ORCHA series of products such as the M-5000 live mixing console, full-duplex two-way communication on a maximum of 64 channels at 48kHz (32 channels at 96kHz). The card contains primary and secondary ports to allow for redundancy or daisy-chained Dante-enabled devices, and a control port.
- Dante Interface Cards