Attero Tech by Q-SYS - Synapse D32o

Attero Tech by Q-SYS – Synapse D32o

More details

Product Information

The Synapse D32o is a Dante™/AES67 networked audio interface with 32 line level analog outputs.

Features

32 line level balanced outputs with front panel for network level control
Pair with the Synapse D32i for high quality network audio signal extension, or driving large racks of analog input amplifiers
Software controllable output matrix routing
Supports Dante™-AES67 Interoperablity Mode for universal network audio compatibility with virtually any networked DSP or mixing console
Easily assignable front panel headphone access, volume control and source selection – includes local input and Dante™ monitoring modes
Integrated power supply with optional external supply for applications requiring redundant power requirements
Configurable Dante™ interface for redundant or switched operation
Integrated SFP ports for direct connection to fiber for long haul signal extension applications
SFP Ports can double as switched connections in both redundant and switched operation to minimize the need for external network switches

Specifications

Dante Ch: 32x0
Bit Depth: 16-bit, 24-bit
Sample Rate: 44.1kHz, 48kHz, 88.2kHz, 96kHz
AES67 Enabled

AVN-DIO19

The AVN-DIO19 audio converter and interface converts up to eight digital stereo AES3 inputs and eight digital stereo AES3 outputs to and from the Dante Audio-over-IP networking standard. Each input can accept sample rates from 32kHz to 192kHz, which will be sample rate converted to the Dante system sample rate. All outputs follow the Dante system sample rate.

I/O Interfaces

Dante Ch: 16x16
16-bit, 24-bit, 32-bit

See the product

Cypress

Cypress – AIP-D1401

4 Balanced In, Analog Audio to Dante & 4 Balanced Out, Dante to Analog Audio

Adjustable phantom power from +0V to +48V.
Easily route audio with 3rd party units in the Dante network.
May be powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)

I/O Interfaces

See the product

GHIELMETTI

Ghielmetti – GDP 1132 Dante Plus

The GDP 1132 Dante offers you efficiently the possibility to connect the “Analog world” with the Dante Network. With the new GDP 1132 Dante, you can now patch your Dante signals, add effortless 16 analogs inputs to your Dante network or extract 16 Dante channels as analog outputs, just by simple patching.

The GDP 1132 Dante is not only a patching solution as it enable you also to mix all signals. These newly mixed signals are then available to be fed into your Dante Network.

Through its front display and navigation knobs, there is no need for a Dante Controller. Furthermore, monitoring, mixing and configuration can be made either from the front display or via a remote web browser.
The GDP 1132 Dante is a 19”, 1 RU device, its assembly depth is 220 mm, which make it very interesting for integration in tight spaces, such as OB-Vans

I/O Interfaces

See the product

Attero Tech by Q-SYS – Synapse D32o

Product Information

Specifications

Similar Products

AVN-DIO19

Cypress – AIP-D1401

Ghielmetti – GDP 1132 Dante Plus

Stay connected to Dante

Support

Company

Dante Networking Alliance