AtlasIED – BB-1616DT


More details

Similar Products

blu-806_front_new
  • BSS

BSS – BLU-806DA

Formerly known as BLU-806 The Soundweb London BLU-806DA offers configurable I/O, configurable signal processing, Dante / AES67 audio and a high bandwidth, fault tolerant digital audio bus. The BLU-806DA has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. This processor features Dante / AES67 audio with primary and secondary ports for fault tolerance, with control through a separate Ethernet port. As well, the processor includes support for Dante 4.0 firmware for integration with Dante Domain Manager. The BLU-806DA also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km. Four card slots facilitate many different device I/O configurations. Each slot can accommodate any of six available I/O cards, including the Analog Input Card, Analog Output Card, Digital Input Card, Digital Output Card, AEC Input Card, and Telephone Hybrid Card. Each card supports four channels. Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. AEC Input Cards and Telephone Hybrid Cards facilitate specialized processing and interfacing primarily for teleconferencing applications. (Further information about the I/O cards can be found on dedicated datasheets) Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect. 12 Control Inputs and 6 Logic Outputs allow the BLU-806DA to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect. The BLU-806DA and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
    DSPs (Digital Signal Processors)
  • Dante Ch: 64x64
  • 24-bit
201808081728582858
  • Tendzone

Tendzone – SOLON M440 Dante Plus

SOLON M440 Dante Plus is a 4×4 networking audio digital signal processor with a 16×16 Dante module.

Features:

  • 24bit/48kHz sound quality
  • Enhanced microphone gain, 54dB pre-amp gain, 8 levels of gain for users to choose
  • Full featured matrix mixer
  • Adaptive feedback cancellation
  • Automatic gain control
  • Automatic echo cancellation
    DSPs (Digital Signal Processors)
stem-audio-stem-hub
  • Stem Audio

Stem Audio – Stem Hub

When more than one device is used in a room, Stem Hub becomes the brains of the operation. Hub enables multiple units in the room to communicate with each other to function as an ecosystem. With USB Type B, Ethernet, Dante, VoIP, and pluggable terminal blocks, Hub has all your bases covered. When more than one device is used in a room, Stem Hub becomes the brains of the operation. Hub enables multiple units in the room to communicate with each other to function as an ecosystem. With USB Type B, Ethernet, Dante, VoIP, and pluggable terminal blocks, Hub has all your bases covered. Features
  • Acts as the main brain when multiple units are in the same room
  • Dante-enabled
  • Power over Ethernet (PoE)
  • USB Type B
  • VoIP connectivity
  • Pluggable terminal block
  • Wall mountable
  • Connects up to 12 products per room
  • Dimensions: 7" x 1.5" to 1"
    DSPs (Digital Signal Processors)