ASI5751 Dante sound card


More details

Similar Products

allen-heath-sq-dante
  • Allen & Heath

Allen & Heath – SQ Dante

SQ Dante provides any SQ mixer with a full 64x64 channel, 96kHz or 48kHz interface to a Dante network. An SQ fitted with the Dante option card can seamlessly connect to amplifiers, preamps and other devices on the Dante network, making full use of SQ's high resolution 96kHz audio.The SQ Dante card can be switched between 96kHz or 48kHz to accommodate Dante networks running at either sample rate. In addition to facilitating system integration, the card also enables digital splits and affordable multitrack recording direct to a computer.
    Dante Interface Cards
  • Dante Ch: 64x64
  • 24-bit
OPT-AoIP-iVAM_r
  • Wohler

Wohler – OPT-DANTE (iAM)

Enable monitoring from up to a 64ch Dante™ Input in iAM Series products.

Installing a Wohler unit with the Dante hardware option into an existing and functioning Dante network is virtually plug and play. The iAM Series rear panel AoIP jack supports 1Gb/s and 100Mb/s Ethernet devices in Dante Audio over IP network configurations. Channel source selections are made by choosing Input Type ‘AoIP’ in the Configuration-Configure Presets page regardless of which AoIP option is installed. The iAM-series unit is set up at the Wohler factory to be used as a slave rather than a master within the Dante network. Other devices or software, such as a Dante Controller, are expected to be responsible for most device configurations and all audio routing.

    Dante Interface Cards
  • Dante Ch: 64x0
  • AES67 Enabled
lynx-lt-dante_1200px
  • Lynx Studio Technology

Lynx Studio Technology – LT-Dante

LT-DANTE LSlot interface for its Lynx Aurora and Hilo converters. The LT-DANTE is a Dante™ enabled expansion card for audio networking that connects Hilo and Aurora with other Dante-enabled products over Ethernet-based networks. This can be purchased factory installed into Hilo, Aurora 8 and Aurora 16 converters as Hilo-DNT, Aurora 8-DNT and Aurora 16-DNT respectively. The LT-DANTE can also be purchased separately to be used in any Hilo or Aurora converter. LT-DANTE LSlot interface for its Lynx Aurora and Hilo converters. The LT-DANTE is a Dante™ enabled expansion card for audio networking that connects Hilo and Aurora with other Dante-enabled products over Ethernet-based networks. This can be purchased factory installed into Hilo, Aurora 8 and Aurora 16 converters as Hilo-DNT, Aurora 8-DNT and Aurora 16-DNT respectively. The LT-DANTE can also be purchased separately to be used in any Hilo or Aurora converter.
    Dante Interface Cards
  • Dante Ch: 64x64
  • 24-bit