Cart
← Back to Product Catalog

Ampetronic – D10-1 Dante

Amplifiers

More details

Similar Products

Q1200i
  • DMIX

DMIX – Q1200i

◆ High power density and light body weight, not only can meet the needs of large sound amplification system, but also easy to carry and install;

◆ Powerful DSP functions, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

◆ Accurate and intuitive status indicator and LCD function display, working status;

◆ Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

◆ Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

◆ Precise and sensitive temperature detection and protection, to ensure that the machine work within a safe range during heating.

Technical parameters：

Product Model: Q1200i

Product type: Four-channel Dante digital power amplifier

8 Ω power: 300W X4

4 Ω power: 600W X4

Analog maximum input： 22dBu

AES maximum input： 0dBS

Dante input： 48k

Frequency response： 20-20KHz +/- 1dB

THD+N： <0.8%

Damping coefficient： 150

Signal to noise ratio： 100

Working voltage： 180-240V

    Amplifiers
See the product
Duecanali6404DSP_gallery-cardL_front-1024x500
  • Powersoft

Powersoft – Duecanali 6404 DSP+D

The excellent sound quality and ample output power available from the latest member of the Duecanali range is thanks to Powersoft’s unique approach to Class D amplification, making it well-suited to serving as the main system in any venue where performance is priority.

A fully integrated, state-of-the- art DSP yields extensive system management functionality. In addition to sound shaping and limiter functions, the DSP hardware and ArmoníaPlus software enable compliance with the crucial requirements of sound systems for emergency purposes.

The Duecanali range is able to drive low impedance loads (2/4/8 Ohm) and 70V/100V distributed lines selectable per channel delivering a maximum output power per channel of: 1800 W at 8 Ω; 3200 W at 4 Ω; 4600 W at 2 Ω; 9200 W at 4 Ω bridged; 6400 W at 8 Ω bridged; 4000 W at 100 Volt and 3200 W 70 Volt.

The series is also versatile, providing status feedback via its front panel LED display or a connected PC running ArmoníaPlus software.

    Amplifiers
  • Dante Ch: 2x0
  • 24-bit
See the product
Ashly_-_nXp_1504_0
  • Ashly Audio

Ashly – nXp1504d

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis. Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs. Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models). Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.
    Amplifiers
  • Dante Ch: 0x4
See the product