Cart
← Back to Product Catalog

Alcorn McBride – RideAmp

Amplifiers

More details

Similar Products

nXp-3.02-front|nXp-3.02-front
  • Ashly Audio

Ashly – nXp3.02d

The nXp3.02d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • 24-bit
  • 48kHz-96kHz
See the product
powersoft-ottovanali_base_1|powersoft-ottovanali_base_1
  • Powersoft

Powersoft – Ottocanali 4K4 DSP+D

The Ottocanali 4K4 DSP+D offers a wide range of system control and monitoring functions as well as sound shaping options, a total of 4,000 W output power at 4 ohm over 8 channels for lo-Z or distributed line systems. As with former versions of Ottocanali, the DSP+D versions feature switchable main and aux signal inputs per channel, adequate GPIO, alarms, Lo-Z and Hi-Z output connections as well as mono-bridgeable channel pairs. These two RU models implement two redundant universal switch mode power supplies with PFC (Power Factor Correction) and patented SRM (Smart Rails Management) technology that maximises the efficiency of the system as well as drastically reduces power consumption. With two redundant Dante by Audinate digital streams, the Ottocanali 4K4 DSP+D will fit any venue as ‘stand-alone’ unit, making it ideal for multi-zone applications in mid to large-scale installs.
    Amplifiers
  • Dante Ch: 16x8
  • 24-bit
See the product
  • Turtle AV

150W Dante Power Amplifier

Powerful. Compact Amplification. This two-channel Class D amplifier delivers exceptional audio performance and flexibility for any AV installation. Supporting low impedance (4Ω/8Ω) stereo systems with 2 x 75W output or bridged constant voltage (70V/100V) systems at 150W, it adapts effortlessly to various speaker setups. Featuring Dante 2CH digital I/O, balanced or unbalanced analog I/O, built-in DSP, and flexible control options, it’s the perfect solution for installations that demand reliability and precision.
    Amplifiers
  • Dante Ch: 2x2
  • 16-bit, 24-bit
See the product