Cart
← Back to Product Catalog

Extron – NetPA U 1004

Amplifiers

More details

Similar Products

Q3200i
  • DMIX

DMIX – Q3200i

◆ High power density and light body weight, not only can meet the needs of large sound amplification system, but also easy to carry and install;

◆ Powerful DSP functions, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

◆ Accurate and intuitive status indicator and LCD function display, working status;

◆ Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

◆ Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

◆ Precise and sensitive temperature detection and protection, to ensure that the machine work within a safe range during heating.

Technical parameters：

Product Model: Q3200i

Product type: Four-channel Dante digital power amplifier

8 Ω power: 4×800W

4 Ω power: 4×1200W

2 Ω power: 4×1500W

Bridge: 4×2500W

Analog audio signal: Maximum input level +18dB

Digital Audio signal: 24/20 bit 48KHz

Corresponding frequency (20-20khz) : + -1dB

THD + N: <0.5%

Dynamic range: 120dB

Ambient humidity: <90%

Damping coefficient: >200

Signal to noise ratio: >105dB

    Amplifiers
See the product
Crest_Audio_CKd_604_Front_03611450
  • Crest Audio

Crest Audio – CKd 604

The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology. The design centers around an ultra-high efficiency amplifier output circuit that reduces weight while increasing output power, reliability and thermal efficiency. The CKd Series offers four multi-channel models to meet the needs of demanding audio installations. The CKd 1208 and CKd 1204 provide 1,250 Watts per channel in eight and four channels, respectively, while the CKd 608 and CKd 604 provide 625 Watts per channel in eight and four channels. Each amplifier channel will operate to rated power in direct 70-volt, 100-volt, 8-ohm or 4-ohm modes, configurable per channel. CKd amplifiers are networkable through Crest Audio’s Nx Dante-8™ and Nx Cobranet-8 NexSys control modules and either Crest Audio NexSys 5 or Peavey® MediaMatrix® NWare™ software programs for advanced control and audio routing. The Nx Dante-8 and Nx Cobranet-8 modules fit into the rear bay of CKd Series power amps and support all NexSys functions, DSP functions and Dante digital audio I/O (via 1 Gigabit Ethernet connection) or Cobranet digital audio I/O (via 100baseT connection). A Control Voltage input is included on each channel to allow external gain control, while the Fault output on each channel allows the CKd power amps to be wired to other monitoring systems. In addition, users can conserve energy by disabling channels that are not in use. The CKd Series includes Crest Audio's exclusive ACL™ (Active Clip Limiting), which automatically reduces gain at the onset of clipping to prevent amplifier and load damage, and IGM™ (Instantaneous Gain Modulation), which monitors load current to protect against overloading.
    Amplifiers
  • Dante Ch: 8x8
See the product
rdl-sf-nh1
  • RDL

RDL – SF-NH1

The SF-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment.  The SF-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment. The output connects through a stereo 3.5 mm Mini-jack. Each channel provides 100 mW into 100 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module. The SF-NH1 is a professional grade product for studio quality fidelity and low noise performance. The SF-NH1 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit. The SF-NH1 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems. Features:
  • Converts Two Dante Network Audio Signals to a Stereo Headphone
  • Output on Professional Quality 3.5 mm stereo MINI Jack
  • Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • Front-Panel Output Level Control
  • Special Software Not Required for Module Setup
  • Exceptional Low-Noise and Low-Distortion Performance
  • High Resolution 24 Bit Digital to Analog Conversion
  • Legendary RDL Analog Filtering Enhances Superb Audio Performance
  • LED Indicator for Valid Power and Network Sync
  • Operation from PoE Power (Class 0, IEEE 802.3af)
  • Equipped for SysFlex™ Rack Mounting or Surface Mounting
    Amplifiers
See the product