The phli u is an active dsp controlled speaker system. Linear phase behavior above 100 Hz garantees nearly prefect impulse response. The massive stainless steel cabinet accommodates two 8.75″ ultra long throw woofers , one 7″ midrange and a A.M.T.-Heil® tweeter.
Dante PoE Speaker can realize its multifunction of the POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.
The Spik 2c is a 8 x 2" Dante, PoE+ powered column speaker.
Extra-thin 68mm wide with aluminum housing. Inspired by the Spik 3 design, it's a welcome addition to the Spik range of speakers, further extending the range of applications where Frentik can be used. With its narrow directivity Spik 2c is a perfect speaker for houses of worship, cultural venues, museums or the hospitality industry amongst many others. Available in black or white.
| Model: | PK-828A+Dante |
| LF Unit: | 8" x2(neodymium) |
| HF Unit: | 1.75"x1(neodymium) |
| Cabinet and paiting: | Birch of plywood and Polyurea |
| Frequency Response: | 55Hz-18KHz(±3dB) |
| Nominal Impedance: | LF 4ohm,HF 8ohm |
| Input Sensitivity: | 108dB (1W/1m) |
| AES Power: | 800W LF,70W HF |
| Peak Power: | 1600W LF,100W HF |
| Max SPL: | 132dB |
| Input Connector: | 1xXLR female+1xXLR male1xVolume,1xpreset,USB,Dante |
| Amplifier @THD1%RMS: | 800Wx800W@4ohm |
| DSP: | 96KHz sample rate,floating point DSPPhase,All past filter,12 EQ,Crossover,Limiter1000ms for each input and outputDriver freeAPP for IOS/Androi(new version) |
| Dante: | Yes |
| WIFI: | Ethernet by TCP/IP |
| Standby and Green energy: | Yes(<0.9W) |
| Working Voltage: | 85-265V,with PFC |
| Dimensions(WxDxH): | 280x335x693mm |
| Weight: | 23kg |
