Cart
← Back to Product Catalog

AD-Systems – NT4-K6

Amplifiers

More details

Similar Products

nXp-3.04-front
  • Ashly Audio

Ashly – nXp3.04d

The nXp3.04d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
See the product
  • Extron Electronics

NetPA U 2008 FX

The Extron NetPA U 2008 FX is an eight channel, high performance Dante-enabled power amplifier with software configurable outputs that can simultaneously drive 8 ohm, 4 ohm, 70V, or 100V loads in multi-zone systems. For maximum flexibility, the total power of two adjacent 200 watt channels is shared, delivering up to 400 watts per single channel, according to system requirements. With its integrated DSP, the NetPA U 2008 FX includes essential signal processing for complex, decentralized systems while AES67 support ensures compatibility with other network audio devices. This Ecofficient Level 2 design features InstaWake, the ability to go from standby to full power in under 50 milliseconds. The fan cooled 1U enclosure does not require empty rack spaces for ventilation and includes front and rear rack mount hardware for stability.
    Amplifiers
  • 48kHz
  • AES67 Enabled
See the product
  • Yamaha

PC412-D

The PC-D / DI series are so much more than just high power amplifier. The impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard. PC-D / DI series are also compatible with ProVisionaire Touch and ProVisionaire Control, and we can provide customized remote controls if required. 1200W x 4 at 8Ω.
  • 4 x 1200W at 8Ω
  • 20 x 8 powerful input matrix function
  • Sampling frequency is up to 96k
  • 16ch Dante input/output
  • Speaker processor such as 16 band PEQ, crossover, filters, delay and limiter
  • Yamaha speaker presets
  • Remote control via ProVisionaire Touch/Contro
    Amplifiers
  • Dante Ch: 16x16
  • 24-bit, 32-bit
See the product