Cart

TD-1212D

Features: 

  • 12 channels of mic/line level analog audio input channel and 12 channels of line level analog audio output channel;
  • 12 channels of DANTE input and 12 channels of DANTE output, using RJ45 network interface;
  • Customize operating software to make configuration changes more flexible and control DSP of different specifications;
  • Built in USB sound card and DanteController can be connected to a computer to achieve audio signal transmission, supporting recording and remote meetings
  • Provide end user interface to achieve centralized control of multiple devices, which can be controlled by third-party devices through local UDP, RS232, RS485;
  • Equipped with AFC (feedback suppression), AEC echo cancellation, ANS (noise suppression), AGC (automatic gain), gain sharing threshold, automatic mixing, dodger and other processing modules;
  • Each channel has independent adaptive feedback suppression, which automatically detects feedback points and suppresses them;
  • Having a 32 x 29 matrix; 9. Full function matrix mixing, adjustable input mixing level;
  • 32 sets of presets, each preset works independently
  • 8 GPIO can independently configure input and output, and can be used as an independent ADC when configuring input;
  • The system supports channel, LINK, and grouping functions, providing the required DSP processing for automatic mixing, paging, routing and allocation, microphone/line processing, automatic gain control (AGC), and room linkage functions
  • Support R232&UDP central control, UDP port can be freely set, and control software code can be viewed;
  • The processor chip adopts ADI architecture, with a minimum of 40 bit DSP floating-point operation engine and free configuration software architecture provided;
  • Dante (redundant): 1000 Base-T Ethernet interface, suitable for redundant Dante networks
  • The digital network audio processor uses DANTE network port and network switch for network digital audio connection
  • Intelligent automatic camera tracking function;
  • Fire linkage function;
  • Multiple control methods can be managed through web pages, mobile phones, tablets, key panels, touch panels, and other means.
  • The front panel is equipped with high-resolution OLED display screens for displaying system status and audio levels. Built in wall panel controller, can be used to switch volume levels in different scenes

TD-1616D

Features: 

  • 16 channels of mic/line level analog audio input channel and 16 channels of line level analog audio output channel;
  • 16 channels of DANTE input and 16 channels of DANTE output, using RJ45 network interface;
  • Customize operating software to make configuration changes more flexible and control DSP of different specifications;
  • Built in USB sound card and DanteController can be connected to a computer to achieve audio signal transmission, supporting recording and remote meetings
  • Provide end user interface to achieve centralized control of multiple devices, which can be controlled by third-party devices through local UDP, RS232, RS485;
  • Equipped with AFC (feedback suppression), AEC echo cancellation, ANS (noise suppression), AGC (automatic gain), gain sharing threshold, automatic mixing, dodger and other processing modules;
  • Each channel has independent adaptive feedback suppression, which automatically detects feedback points and suppresses them;
  • Having a 36 x 33 matrix;
  • Full function matrix mixing, adjustable input mixing level;
  • 32 sets of presets, each preset works independently
  • 8 GPIO can independently configure input and output, and can be used as an independent ADC when configuring input;
  • The system supports channel, LINK, and grouping functions, providing the required DSP processing for automatic mixing, paging, routing and allocation, microphone/line processing, automatic gain control (AGC), and room linkage functions
  • Support R232&UDP central control, UDP port can be freely set, and control software code can be viewed;
  •  The processor chip adopts ADI architecture, with a minimum of 40 bit DSP floating-point operation engine and free configuration software architecture provided;
  • Dante (redundant): 1000 Base-T Ethernet interface, suitable for redundant Dante networks
  • The digital network audio processor uses DANTE network port and network switch for network digital audio connection
  • Intelligent automatic camera tracking function;
  • Fire linkage function;
  • Multiple control methods can be managed through web pages, mobile phones, tablets, key panels, touch panels, and other means.
  • The front panel is equipped with high-resolution OLED display screens for displaying system status and audio levels. Built in wall panel controller, can be used to switch volume levels in different scenes

ZW-D1

ZW-D1 is a device with a small and exquisite appearance. It is not only easy to carry, but also easy to put into a pocket or bag. At the same time, it adopts a plug-and-play design, without cumbersome installation steps. It replaces the Dante virtual sound card and can be used immediately with just a simple plug. Connect to your Dante network, support 2X2 channel two-way audio, allow PC or mobile device to play and receive audio, and the device uses USB-A/C connection.

ZW-D2

Features

  • It can display the current IP and other settings.
  • Gain and other parameters can be set in the software
  • Connect directly to the network using Ethernet cables
  • Dante devices can be controlled in remote mode
  • Dual port backup, PoE power supply, and independent external power supply
  • 4 microphone/line input with phantom power supply, 4 line outputs
  • The entire scalable Dante system has 512 bidirectional audio channels

Technical specifications:

  • Frequency response 20-20kHz
  • Input impedance of 2k ohms (microphone); 68 ohms (line)
  • Output impedance of 100 ohms (microphone); 100 ohms (line)
  • High pass filtering at 80 Hz, 18 dB/octave
  • Sampling rate 48K
  • Power consumption less than 5w
  • Total harmonic distortion<0.01%

Interface:

  • (Input) Balanced audio, quick connect to 4 header ports
  • (Output) Balanced audio, quick connect to 4 header ports
  • 1 independent power interface
  • 2 Dante network interfaces
  • Phantom power supply+48V
  • Power supply requirement+48V DC or IEEE802.3af PoE
  • Dimensions 44mm x 210mm x 166mm

ZW-D4

The products of the conversion interface series are low-latency, high-precision data transmission solutions based on the Dante network. Analog signals can be converted into digital signals and connected to the Dante network through the network port. The data flowing into the Dante network can be routed and configured through its dedicated PC software Dante Controller, output to different Dante devices, and then converted into analog signals through DA conversion.

ZW-D5

The converter is compatible with all Dante interfaces and has all the features of Dante audio networks. Each converter box can provide high-fidelity sound quality restoration, ultra-low latency and precise synchronization of sampling rates across the entire network.

Compact design, easy to use, plug and play; conversion between analog audio signals and Dante digital audio signals; expansion of audio and power through a network cable; full support for Dante software, easy configuration of network and audio routing; support for PoE power supply, built-in lightning and surge protection;

TX-AVS

Feature

  •  A device that integrates video matrix, audio matrix, amplifier module, and central control processor.
  •  It can provide complete integration requirements for small and medium-sized multimedia systems, suitable for highly integrated application environments that require multiple display devices, sound reinforcement devices, processing switching devices, environmental equipment control, etc. It can complete audio and video and environmental system control through PAD, and has real-time monitoring of signal status.
  • 16 input and 8 output audio matrix, with 4 inputs fixed at the factory and 12 inputs and 8 outputs customized by the user
    AFC (Feedback Suppression) for independent channels, using notch algorithm, with a 10dB increase in transmission gain, noise suppression (ANS), and an 18dB increase in signal-to-noise ratio 3.8 segment British parametric equalization, providing
  • filter options: Parametric, Lowshelf,Highshelf,Lowpass,Highpass
  • Built in USB sound card, supporting music playback, recording, and soft video conferencing (such as ZOOM, Tencent Meeting, DingTalk Meeting, etc.)
  • Compatible with HDMI 2.0, HDCP 2.2, HDCP 1.4, and DVI 1.0
  • 4 HDMI inputs and 4 HDMI outputs
  • Separate audio from independent channels for digital audio processors
  • Intelligent EDID management, including AUTO, COPY, and STD
  • 4 channels of RS-232 and 4 channels of RS-485 can independently set the baud rate
  • 200W, 300W, 600W power amplifier modules are optional, with a maximum power not exceeding 1800W

ZW-B202

Feature

  • 2 × 2, 2-wire/MIC input and 2-wire output
  • Support adjusting the gain per input from 0 to+48dB
  • Supports 44.1k or 48k audio sampling rates
  • 48V power supply for MIC input
  • Control through Web UI and monolithic controller
  • Supports PoE power supply (IEEE802.3af)

ZW-B404

Features

  • Microphone/line input: 4 x balanced audio inputs.
  • Line output: 4x balanced audio output.
  • Dante：1 x Dante ® Ethernet interface connector, supporting POE power supply; 1 x Dante ® Ethernet interface connector; Two interfaces implement data exchange function.
  • DC 12V: A DC connector used for connecting DC 12V1A power adapters.
  • Input interface: 4-channel microphone/line input,
  • 3-pin green wiring terminal Output interface: 4-channel line output,
  • 3-pin green terminal block Gain: Input: 0~+48dB, 6dB per step;
  • Output: -60~0dB,
  • 1dB per step Maximum level: Input:+18dBu @ 0dB input gain;
  • Output:+18dBu @ 0dB output gain
  • Input impedance:>1.8k Ω Effective
  • Input Noise (EIN): -119dB @ 48dB gain
  • Effective output noise:<-79dBu @ 0dB gain
  • Harmonic distortion:<0.05%
  • Sampling rate: 44.1kHz or 48kHz

Vittoria 64 DR

The Vittoria provides a bridge between two internal and separate Dante and  Ravenna networks. These networks are completely isolated from each other with 100% network security, providing a complete network firewall. Vittoria links 64 channels from each network directly in DSP, allowing the passing of bi-directional audio but with complete isolation and security from each separate network.

As each network is isolated, they can operate asynchronously and at different sample rates from each other without any problems. Each network can operate at sample rates from 44.1 kHz up to 96kHz.

Features:

  • Provides a firewall between a Dante & Ravenna network interface
  • Acts as a bridge bi-directionally with Dante and AES67/Ravenna Networks
  • Acts as an interface between Dante and full SMPTE ST2110-30
  • 64 input and output channels at sample rates up to 48kHz
  • 32 input and output channels at sample rates up to 96kHz
  • The two networks can operate asynchronously or at different sample rates
  • Support for 44.1-96kHz