Exquisite and minimalist structural design, highlighting a modern atmosphere and conforming to ergonomics;
The microphone rod can be disassembled during recess, making it convenient for equipment installation and maintenance
Equipped with a 2-inch high-definition Halal color screen, it can display the microphone battery level, signal strength, microphone working status, microphone channel group and ID number.
Use UHF ultra-high wireless radio frequency technology to transmit audio signals and control management signals;
In conjunction with the camera tracking host, the camera can automatically track after being pre-set by the computer;
The chairman has priority button function and chairman priority mode;
Anti mobile phone interference microphone core, stable connection, durable and reliable;
Ultra low power consumption circuit design, built-in large capacity lithium battery, can be charged through a charging case;
Cooperate with the host to achieve network audio transmission and realize audio signal interconnection and intercommunication;
The conference unit has a unique serial number, and the conference system can automatically assign an ID to the conference unit.
Exquisite and minimalist structural design, highlighting a modern atmosphere and conforming to ergonomics.
Special electret capacitive microphone core design, with clear and bright sound quality and high sensitivity;
Support mainstream network audio protocols, connect to switches using Ethernet cables, transmit audio over the network, and achieve signal interconnection;
Adopt POE (Power over Ethernet) power supply;
The entire scalable Dante system has 512 bidirectional audio channels;
Anti RF and mobile phone interference;
The base is equipped with damping and shock-absorbing rubber, effectively reducing the noise generated by external vibrations on the microphone.
The microphone rod is made of pure copper casting and combined with radio frequency interference (0RF) shielding technology, providing outstanding ability to prevent radio frequency interference
The panel is made of advanced materials, reflecting a grand and high-end atmosphere;
The host is equipped with an OLED color screen, displaying the device’s IP address and firmware version, and the input and output channels display electric frequency signals;
Built in USB sound card, can be connected to a computer to achieve audio signal transmission, supports recording and remote meetings;
Provide end user interface to achieve centralized control of multiple devices, which can be controlled by third-party devices through local UDP, RS232, RS485;
Each channel has independent adaptive feedback suppression, which automatically discovers feedback points and suppresses them. It also has processing modules such as AFC (feedback suppression), AEC echo cancellation, ANS (noise suppression), AGC (automatic gain), gain sharing threshold, and automatic mixing;
Featuring a 20×17 matrix, fully functional matrix mixing, with adjustable input mixing levels;
8-way DANTE input, 8-way DANTE output, using RJ45 network interface
Customize operating software to make configuration changes more flexible and control DSP of different specifications;
8 GPIO can independently configure input and output, and can be used as an independent ADC when configuring input;
16 sets of presets, each working independently;
Support channel shell, LINK, and grouping functions;
Fire linkage function;
Support R232&UDP central control, UDP port can be freely set, and control software code can be viewed;
The processor chip adopts ADI architecture, with a minimum of 40 bit DSP floating-point operation engine and free configuration software architecture provided;
Multiple control methods, which can be managed through web pages, mobile phones, tablets, key panels, touch panels, and other means
The panel is made of advanced materials, reflecting a grand and high-end atmosphere;
The host is equipped with an OLED color screen, displaying the device’s IP address and firmware version, and the input and output channels display electric frequency signals;
Built in USB sound card, can be connected to a computer to achieve audio signal transmission, supports recording and remote meetings;
Provide end user interface to achieve centralized control of multiple devices, which can be controlled by third-party devices through local UDP, RS232, RS485;
Each channel has independent adaptive feedback suppression, which automatically discovers feedback points and suppresses them. It also has processing modules such as AFC (feedback suppression), AEC echo cancellation, ANS (noise suppression), AGC (automatic gain), gain sharing threshold, and automatic mixing;
Having a 20 x 21 matrix; Full function matrix mixing, adjustable input mixing level;
Customize operating software to make configuration changes more flexible and control DSP of different specifications;
8 GPIO can independently configure input and output, and can be used as an independent ADC when configuring input;
16 sets of presets, each working independently;
Support channel shell, LINK, and grouping functions;
Fire linkage function;
Support R232&UDP central control, UDP port can be freely set, and control software code can be viewed;
The processor chip adopts ADI architecture, with a minimum of 40 bit DSP floating-point operation engine and free configuration software architecture provided;
Multiple control methods, which can be managed through web pages, mobile phones, tablets, key panels, touch panels, and other means
The panel is made of advanced materials, reflecting a grand and high-end atmosphere;
The host is equipped with an OLED color screen, displaying the device’s IP address and firmware version, and the input and output channels display electric frequency signals;
Built in USB sound card, can be connected to a computer to achieve audio signal transmission, supports recording and remote meetings;
Provide end user interface to achieve centralized control of multiple devices, which can be controlled by third-party devices through local UDP, RS232, RS485;
Each channel has independent adaptive feedback suppression, which automatically discovers feedback points and suppresses them. It also has processing modules such as AFC (feedback suppression), AEC echo cancellation, ANS (noise suppression), AGC (automatic gain), gain sharing threshold, and automatic mixing;
Featuring a 32×29 matrix, fully functional matrix mixing, with adjustable input mixing levels;
12 DANTE inputs, 12 DANTE outputs, using RJ45 network interface
Customize operating software to make configuration changes more flexible and control DSP of different specifications;
8 GPIO can independently configure input and output, and can be used as an independent ADC when configuring input;
16 sets of presets, each working independently; 12. Support channel shell, LINK, and grouping functions;
Fire linkage function;
Support R232&UDP central control, UDP port can be freely set, and control software code can be viewed;
The processor chip adopts ADI architecture, with a minimum of 40 bit DSP floating-point operation engine and free configuration software architecture provided;
Multiple control methods, which can be managed through web pages, mobile phones, tablets, key panels, touch panels, and other means
The panel is made of advanced materials, reflecting a grand and high-end atmosphere;
The host is equipped with an OLED color screen, displaying the device’s IP address and firmware version, and the input and output channels display electric frequency signals;
Built in USB sound card, can be connected to a computer to achieve audio signal transmission, supports recording and remote meetings;
Provide end user interface to achieve centralized control of multiple devices, which can be controlled by third-party devices through local UDP, RS232, RS485;
Each channel has independent adaptive feedback suppression, which automatically discovers feedback points and suppresses them. It also has processing modules such as AFC (feedback suppression), AEC echo cancellation, ANS (noise suppression), AGC (automatic gain), gain sharing threshold, and automatic mixing;
Equipped with a 36×25 matrix, fully functional matrix mixing, and adjustable input mixing levels;
16 DANTE inputs, 16 DANTE outputs, using RJ45 network interface 9. Customize operating software to make configuration changes more flexible and control DSP of different specifications;
8 GPIO can independently configure input and output, and can be used as an independent ADC when configuring input;
16 sets of presets, each working independently; 12. Support channel shell, LINK, and grouping functions;
Fire linkage function;
Support R232&UDP central control, UDP port can be freely set, and control software code can be viewed;
The processor chip adopts ADI architecture, with a minimum of 40 bit DSP floating-point operation engine and free configuration software architecture provided;
Multiple control methods, which can be managed through web pages, mobile phones, tablets, key panels, touch panels, and other means
The panel is made of advanced materials, reflecting a grand and high-end atmosphere;
The host is equipped with an OLED color screen, displaying the device’s IP address and firmware version, and the input and output channels display electric frequency signals;
Built in USB sound card, can be connected to a computer to achieve audio signal transmission, supports recording and remote meetings;
Provide end user interface to achieve centralized control of multiple devices, which can be controlled by third-party devices through local UDP, RS232, RS485;
Each channel has independent adaptive feedback suppression, which automatically discovers feedback points and suppresses them. It also has processing modules such as AFC (feedback suppression), AEC echo cancellation, ANS (noise suppression), AGC (automatic gain), gain sharing threshold, and automatic mixing;
Featuring a 32×29 matrix, fully functional matrix mixing, with adjustable input mixing levels;
16 DANTE inputs, 16 DANTE outputs, using RJ45 network interface
Customize operating software to make configuration changes more flexible and control DSP of different specifications;
8 GPIO can independently configure input and output, and can be used as an independent ADC when configuring input;
16 sets of presets, each working independently; 12. Support channel shell, LINK, and grouping functions;
Fire linkage function; 14. Support R232&UDP central control, UDP port can be freely set, and control software code can be viewed;
The processor chip adopts ADI architecture, with a minimum of 40 bit DSP floating-point operation engine and free configuration software architecture provided;
Multiple control methods, which can be managed through web pages, mobile phones, tablets, key panels, touch panels, and other means
1.8 mic/line level analog audio input channels and 8 line level analog audio output channels;
8 DANTE inputs, 8 DANTE outputs, using RJ45 network interface;
Customize operating software to make configuration changes more flexible and control DSP of different specifications;
The built-in USB sound card can be connected to the computer to achieve audio signal transmission, supporting recording and remote meetings
The software has built-in DanteController routing settings, which can be completed with just one software.
Provide customized user interface for terminal users to achieve centralized control of multiple devices, which can be controlled by third-party devices through UDP, RS232, RS485 of the local machine;
Equipped with AFC (feedback suppression), AEC echo cancellation, ANS (noise suppression), AGC (automatic gain), gain sharing threshold, automatic mixing, dodger and other processing modules;
Each channel has independent adaptive feedback suppression, which automatically detects feedback points and suppresses them;
It has a 20 x 17 matrix; 10. Full function matrix mixing, adjustable input mixing level;
32 sets of presets, each preset working independently;
It has permission setting function, which can set super administrator, general user, and guest permissions;
8 GPIO can independently configure input and output, and can be used as an independent ADC when configuring input;
The system supports channel, LINK, and grouping functions, providing the required DSP processing for automatic mixing, paging, routing and allocation, microphone/line processing, automatic gain control (AGC), and room linkage functions
Support R232&UDP central control, UDP port can be freely set, and control software code can be viewed;
The processor chip adopts ADI architecture, with a minimum of 40 bit DSP floating-point operation engine and free configuration software architecture provided;
The digital network audio processor uses the DANTE network port to connect to the network switch for network digital audio
Intelligent automatic camera tracking function;
Fire linkage function; 21. Multiple control methods can be managed through web pages, mobile phones, tablets, key panels, touch panels, and other means.
The front panel has a high-resolution OLED display screen, which is used to display system status and audio settings, and can call the scene to switch volume levels
