WorxAudio – WaveSeries 8M


More details

Similar Products

Spik5-front
  • FRENETIK

FRENETIK – Spik 5

Compact 2-way coaxial wide-opening amplified processor speaker, Dante™ PoE+ • 60W class D amplifier board with integrated latest generation DSP • Wide and homogeneous directivity 95° x 95° • Wooden cabinet • Euroblock connector for use with external amplification • Remote control of volume, bass, treble via FRENETIK Adjust software • Board temperature monitoring • No logo on front panel

Technical data :
Type: Amplified 2-way coaxial speaker, Dante™ PoE+
Power (passive mode): 60 W (8 ohms)
Amplification: 60 W (classe D)
Dante™ Receiver: 1 (16 / 24 / 32 bit - 44.1 à 96 kHz)
Transducers: 1 x 5" woofer / 1 x 1" tweeter
Peak SPL capacity (1 m): 112 dB
Bandwidth (-10 dB): 90 Hz – 20 kHz
Directivity (H x V): 95° x 95°
Input connectors: 1 x RJ45 (Dante™ active mode) + 1 Euroblock (passive mode)
Insert: 4 x M6
Power supply: PoE+ (IEEE 802.3 at)
Dimensions: 165 x 165 x 193 mm
Weight: 2.50 kg

    Speakers
VEXO112-B-W
  • AUDAC

AUDAC – VEXO112A

The VEXO series are compact high performance 2-way active loudspeakers and come in 3 different models, each of them with different sizes and performances meeting the requirements of every application. The VEXO series loudspeakers consist of active and passive versions. The low-frequency transducer, which is made out of high-quality materials, is combined with a 1.7” voice coil compression driver, enabling high sound pressure levels and a tight driver response with a rotatable 90° x 70° coverage pattern for a wide range of applications. Thanks to the unique driver composition, the VEXO112 delivers a clear and natural sound with an RMS power of 400 Watts and a maximum power of 1600 Watt. The frequency response (±3dB) starts from 58Hz up to 20 kHz and the sensitivity (1W/1m) reaches 99 dB while a maximum continuous sound pressure level from 125 dB can be achieved
    Speakers
CNET8D
  • DMIX

DMIX – CNET8D

Technical parameters:

Speaker model: CNET8D

Speaker type: 8" Active two-division loudspeaker

Unit configuration: 8"(200mm) woofer 1"(25mm) Treble driver

Frequency response: 80Hz-19kHz

Rated power: 100W

Sound pressure level: 115dB

Sensitivity: 92dB

Rated impedance: 8Ω

Directivity (H×V) : 80°×80°

Dante Digital network interface: 2×RJ45 interface

Analog interface: 1×XLR Balanced input,1×XLR Balanced output

Active power amplifier module: 100W

Volume knob control: Yes

Central control interface: RS232

Size (mm) : 250×391×235 (W×H×D)

    Speakers