Cart
← Back to Product Catalog

WM-6D

Speakers

More Details

Similar Products

amk-DT64-C-X
  • AMK

AMK – DT64-C-X

The AMK DT64-C-X loudspeaker is powered by a POE+ network amplifier with Dante™ / AES67 input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 602, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations. The AMK DT64-C-X loudspeaker is powered by a POE+ network amplifier with Dante™ / AES67 input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 602, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations. One PoE+ amplified speaker can power a total of (4) speakers, including (3) additional passive speakers, with one separate audio channels for each speakers. The CX602 loudspeaker driver has excellent dispersion, wide bandwidth and a smooth frequency response which makes this the top choice for today’s overhead commercial applications. This assembly can be used in wide range of projects for paging and background music applications. The DT64-C-X is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms. The end users will appreciate both the sound and visual quality of these speakers.
    Speakers
See the product
K-array_-_KMT12_Mark_I_800pxl|K-array_-_KMT12_Mark_I_800pxl
  • K-array

K-array – KMT12 Mark I

KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm. KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm. The unique four-corner port configuration gives symmetrical back loading to the speaker for extended bass response with very low distortion. This also gives incredible structural strength to the cabinet despite its light weight. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.  
    Speakers
See the product
innovox-flex-precision-fp-v2-pxd
  • Innovox

Innovox – Flex Focus Series

Flex Focus loudspeakers employ shaded line array technology with ribbon HF drivers to extend sound projection in longer meeting rooms. Their Frequency response (120-20,000 Hz ±3 dB) has been optimized for speech intelligibility.

Flex Focus Vertical Arrays are available in two configurations. A standard version with loudspeakers oriented for monitors which are mounted at a normal viewing height and an LAC (Lowered Acoustic Center) version for monitors which are mounted above normal viewing height.

Flex Focus loudspeakers are also available in three powered configurations, each with 100- watt class D amplifiers:

  • P – Basic power amp
  • PX – Power amp with pre-amp & DSP
  • PXD – Network version which adds Dante and ethernet control

Dante-enabled models include:

  • Flex Focus FF-V2.4 PXD
  • Flex Focus FF-V2.6 PXD
  • Flex Focus FF-V2.6 PXD LAC
  • Flex Focus FF-V2.10 PXD
  • Flex Focus FF-V2.10 PXD LAC
  • Flex Focus FF-H1.4-50 PXD
  • Flex Focus FF-H1.6-50 PXD
  • Flex Focus FF-H1.4-25 PXD
    Speakers
See the product