Voltera - D-1200-8

Mansion

Mansion – PLA2DI

PLA2DI power amplifier provides 120W output power per channel into 4Ω and 8Ω, the amplifier can also be bridged to supply up to 240W output power into 70V or 100V. PLA2DI power amplifier provides 120W output power per channel into 4Ω and 8Ω, the amplifier can also be bridged to supply up to 240W output power into 70V or 100V. Designed in Class D amplification with the slot card of Dante interface, accepts the Audio signal from the Dante network. With the compact housing, PLA2DI provides the excellent sound and reliable quality for many install projects. Features

Two Channels Model – 120W RMS
Stereo into 4-8 Ohm loads
Bridged mode 240W output for 70V or 100V (Direct Drive)
Power down after ~15 minutes of no signal and comply with Energy Star Power consumption limits of < 0.5W in standby
Yellow LED (Front Panel) to indicated Standby mode is active
Terminal Block analog audio inputs
Selection for Power-Up mode
Switch for High Pass Filter
Natural cooling without Fan
TRIGGER could be external remoting ON/OFF
Short circuit protection
Overheating protection

Amplifiers

See the product

Ashly Audio

Ashly – nXe1504bd

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis. Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs. Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models). Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.

Amplifiers

Dante Ch: 4x0

See the product

Fohhn

Fohhn – MA-4.100 DAN

The MA-4.100 DAN is a compact digital amplifier with integrated 4 × 4 matrix was developed for media applications and small-scale sound reinforcement. The MA-4.100 DAN is a compact digital amplifier with integrated 4 × 4 matrix was developed for media applications and small-scale sound reinforcement. The MA-4.100 is equipped with a Dante UltimoX4 audio input. Despite being very small, the new amplifier features the latest generation of Fohhn DSPs – integrated into both inputs and outputs. The MA-4.100 is perfectly suited for smaller audio applications:

Conference rooms and -systems
Small lecture theatres and class rooms
Hotels and restaurants
Integration into media boards
Media sound for displays and videowalls
Shops and retail
Fitness centres
Low-ohm public address systems
Amusement parks
Museums and exhibitions
Delay- and near field amplification within larger systems
Small churches and community halls

Amplifiers

Dante Ch: 4x4
16-bit, 24-bit

See the product

Voltera – D-1200-8

Product Information

Specifications

Similar Products

Mansion – PLA2DI

Ashly – nXe1504bd

Fohhn – MA-4.100 DAN

Stay connected to Dante

Support

Company

Dante Networking Alliance