Voltera – D-1200-4M


More Details

Similar Products

duran-audio-industryamp-PB-400-dn
  • Duran Audio

Duran Audio – IndustryAmp PB-400-DN

The PB-400-DN Industry amplifier is an ultra-reliable, high-power, 4 channel (250W per channel) audio power amplifier designed for use in critical systems.  The PB-400-DN Industry amplifier is an ultra-reliable, high-power, 4 channel (250W per channel) audio power amplifier designed for use in critical systems. It is designed to drive 100 V line loudspeaker systems and is equipped with on-board DSP allowing gain, EQ, delay and other parameters to be controlled from a remote location using WinControl software, via DANTE™. The amplifiers are fully monitored, with automatic fault detection and reporting. Inputs may be either balanced analogue audio or digital audio via DANTE™. When used in conjunction with Duran Audio’s OpSTImizer® service the PB amplifiers can provide significant improvements in speech intelligibility within a tunnel.
    Amplifiers
ED008
  • Keiga

Keiga – ED008

* Dante™ Ultimo insides with hi performance Class D Audio DSP Amplifier

* Built-in KAP™ (Keiga Audio Performance) software to configure audio DSP

* KAP™ provides “Find-me” ping signal for easy location identification

* KAP™ tools can save and load the speaker profiles saving installation time & efforts

* Audio DSP provides up to 5 sets of PEQ setting for each channel

* One Rj45 connection for the Dante™ audio signals and PoE power network

* Supports both IEEE 802.3af/at/bt (PoE/PoE+/PoE++) and local DC-In

* Dante™ Domain Manger and AES67 compliant

* Auto detect PoE++ (90W), PoE+ (30W) or PoE (15W) power levels

* Fully protection with OTP, OTP, OVP, Auto Recovery and Surge Protection

* LED status display for PoE status and channel signal and peak.

* Provides GPIO for external control usage

    Amplifiers
renkus-heinz-sa-series_1200px|renkus-heinz-sa-series_1200px
  • Renkus-Heinz

Renkus-Heinz – SA Series

Renkus-Heinz SA Series amplifiers are designed to provide the cleanest possible sound quality and performance, even with the most complex audio signals Renkus-Heinz SA Series amplifiers are designed to provide the cleanest possible sound quality and performance, even with the most complex audio signals. Making their debut with the new C and T Series point source loudspeakers, Renkus-Heinz SA Series amplifiers will ultimately enable all Renkus-Heinz loudspeaker models to be freely combined, offering full networking capabilities, RHAON II control and monitoring, and connection via a choice of Analog, AES/EBU, or Dante single or redundant network input.  Renkus-Heinz SA Series amplifiers will be available in three models:
  • the SA-625 amplifier outputs 500W + 125W
  • the SA-1250 outputs 1,000W + 250W
  • the SA2000 delivers a total of 2000W
With power to spare, SA 625 Series amplifiers deliver more than enough Wattage to easily drive additional CX loudspeakers, SA 1250 and 2000 models are equipped with line voltage looping.  All SA Series amplifiers are equipped with native DSP, including delay, equalization, multi-channel limiting, and noise reduction, with nine available preset memories. Available connectivity configurations include Analog input, as well as RHAON II control and monitoring Dante with either Single or Redundant network Further, networking connectivity in copper and optical formats. 
    Amplifiers