Cart
← Back to Product Catalog

Symetrix – xIO Bluetooth

I/O Interfaces

More details

Similar Products

focusrite-Red-8Pre
  • Focusrite

Focusrite – Red 8Pre

64 In / 64 Out Thunderbolt™ 2 and Pro Tools | HD™ compatible audio interface, with Dante networking audio connectivity. 64 In / 64 Out Thunderbolt™ 2 and Pro Tools | HD™ compatible audio interface, with Dante networking audio connectivity. Red 8Pre features both Thunderbolt 2 connectivity and dual mini-DigiLink ports allowing you the best of both Core Audio and Pro Tools|HD workflows. Take Red 8Pre on the road for location recording over Thunderbolt then connect the same interface to Pro Tools|HDX or Pro Tools|HD Native back at the studio for mixdown. The combination of low-latency conversion and driver technology allows real-time foldback mixes to be created in the DAW while you continue to use your native plug-ins. Unlike many interfaces, both mini-DigiLink and Thunderbolt 2 connectivity comes as standard, so there’s no need to buy an additional option card.
    I/O Interfaces
  • Dante Ch: 32x32
  • 24-bit
See the product
sonifex-avn-aio4
  • Sonifex

Sonifex – AVN-AIO4

AVN-AIO4 is a multi-channel Dante® Audio interface, which provides 4 balanced analogue inputs and outputs to and from the Dante network.  AVN-AIO4 is a multi-channel Dante® Audio interface, which provides 4 balanced analogue inputs and outputs to and from the Dante network. Simple to configure and operate, these cost effective rack-mount solutions offer an easy solution for AV professionals and system integrators. Packaged in a 1U form factor, they use Neutrik XLR connectors, are Dante® AES67 compliant and use PoE for power.
    I/O Interfaces
  • Dante Ch: 4x4
  • 16-bit, 24-bit, 32-bit
See the product
rdl-dd-bn2m_1200px_0|rdl-dd-bn2m_1200px_0
  • RDL

RDL – DD-BN2M

The DD-BN2M is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block. The DD-BN2M is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN2M. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN2M fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN2M is PoE powered, and is available in multiple finishes with optional customized graphics. The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN2M. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN2M in a triple gang box or may be mounted remotely in a single box. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN2M is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN2M’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.
    I/O Interfaces
See the product