Cart
← Back to Product Catalog

SSL – System T – S500

Mixers

More details

Similar Products

Qu-5D
  • Allen & Heath

Qu-5D

Compact 38in/24out 96kHz Mixer with Dante The new Qu retains the much-loved appearance and form factor of the original Qu series, but with multiple hardware improvements to elevate the sonic performance and mixing experience. Audio Updated microphone preamps and high-performance 96kHz AD/DA converters combine to deliver pristine audio to and from the XCVI core, preserving every detail of the source. Control Every channel now features a channel display – showing channel name, channel type, or socket number – and a chromatic channel meter for at-a-glance level information, and the new touchscreen accommodates a completely redesigned user interface. Dante Enabled The Qu-5D provides a 16×16 Dante interface at 96kHz or 48kHz for integration into larger systems or installs. Features
  • 17 100mm Motorised Faders
  • 16 XLR/Jack ‘Combi’ Mic/Line Input Sockets
  • 12 XLR Output Sockets
  • 19” Rack Mountable (optional kit available)
  • 16×16 48/96 kHz Dante interface with dedicated locking EtherCon port
    Mixers
  • Dante Ch: 16x16
  • 48kHz-96kHz
See the product
calrec-apollo_1200px|calrec-apollo_1200px
  • Calrec

Calrec – Apollo

Apollo provides unsurpassed processing power and a control surface with displays, touch screens and light-emitting knobs which detail function and status. Apollo provides unsurpassed processing power and a control surface with displays, touch screens and light-emitting knobs which detail function and status. Apollo utilises Bluefin2, the next generation of Bluefin HDSP, which provides unrivalled resources of up to 1020 channel processing paths, 128 program busses, 96 IFB/Track outputs and 48 auxes. With single and dual fader options, Apollo can squeeze in more faders into a single footprint that any other console, and its integrated router provides total network flexibility. Apollo’s I/O functions are performed by the Hydra2 network, which uses high capacity 8192² cross-point routers and a variety of I/O units.
    Mixers
  • Dante Ch: 64x64
See the product
stacks-image-bcc6051-1200x112-1
  • Nixer

Nixer – RL192

A 1U 19inch rack mounted AoIP monitoring and mixing unit.

4 models are available the RL64, RL128, RL192 and RL256 and each unit can be configured at time of purchase to be Dante or Ravenna

RL Series units allows two modes of operation a mixing mode which can mix up to 256 channels at 48kHz (128 channels at 96kHz) plus microphone input (via headphone connector) and AES input to create a 259 into 2 mixer. Alternatively, it can be set into a simple Listen mode where touching a channel instantly routes to the LR output and cancels any previous selection.

The outputs of the LR bus are presented to the user via the inbuilt 4mm x 9mm full range speakers or via the 3.5mm headphone jack. The speakers are automatically muted when a headphone jack is inserted. Simultaneous outputs are also available in the form of the stereo balanced line outputs and AES output accessed via XLR connectors on the rear of the RL Series Unit. The mix output is also routed to the AoIP output.

The RL Series units are operated and controlled via the large letterbox 6.6” diagonal (168mm) 1440 x 240 24-bit colour LCD and capacitive touch panel.

A simple and elegant menu system has been designed to be intuitive to navigate allowing the user to access all the features of the RL Series unit very quickly.

The high-resolution screen is easy to read presenting comprehensive metering, routing and status information to the user.

Firmware updates of the RL Series unit are achieved via a dedicated USB micro AB connector on the front panel. There is also a dedicated 3.5mm jack socket for the headphone output

Stacks Image 30

On the rear of the RL Series unit there are 4x Primary and Secondary ports for up to 4x AoIP inputs. 2x balanced line outputs on 3 pin male XLRs and AES output also on 3 pin male XLR. These outputs can be configured to follow the main volume settings of the speakers/headphones or they can also be set to follow the main Mute control.

Additionally, there is an AES input via 3 pin female XLR connector

The RL Series unit can be powered via either of the two 2.5mm DC input connectors requiring 24V @ 2A. These inputs also have a screw lock to prevent accidental unplugging. Using both inputs provides redundancy.

    Mixers
  • Dante Ch: 192x192
  • 16-bit, 24-bit, 32-bit
See the product