SoundTube – IPD-SM52-EZ


More details

Similar Products

cm82-bgm-ii_blackgrille
  • SoundTube

SoundTube – IPD-CM82-BGM-II

One 8.0 inch (203 mm) polypropylene woofer with butyl rubber surround and one 1.0 inch (25 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 55 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 86.0 dB sensitivity, 16 ohm impedance. Incorporates a painted steel magnetic seamless grille for lasting durability and refined aesthetics. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480 and 2043 listed.

    Speakers
AL4.0PoE
  • Aimline

AIMLINE – AL4.0PoE

The Aimline PoE series includes column loudspeaker with an integrated power amplifier that uses Power over Ethernet (PoE +). There is no need for any additional power supply. Thanks to highly efficient power electronics and a specially developed power amplifier an output of 30 W / 60 W peak (when using a PoE+ supply) can be achieved. Two DANTE channels are available with 10-Bd IIR filters, delay and the 24 internal presets offer all necessary configurations. It is controlled and monitored using the IP-based PAN C software. All active AIMLINE digital systems can therefore be controlled via just one software interface.

    Speakers
2017225112834
  • BARE

BARE – BR-10D6

● Model: BR-10D6
● Specification: 6 inch 2 frequency division
● Driver: low frequency 6 inch, high frequency 1 inch
● Power: 80 watts
● Frequency response: 60-18KHz
● Sensitivity (W / M): 94dB
● Scattering angle: 80x60
● Crossover frequency 2.5KHz
● Audio transmission: Dante digital audio transmission card
● Active power amplifier module: Class D power amplifier 200 watts 8 ohms
● Dimension (W * D * H): 205x205x350mm

    Speakers